FFP2 KN95 N95 Respirator Face Mask manufacturer FDA Certified and CE Approved

FFP2, KN95 or N95 Face Mask Certification

This product has been tested according to the following European Standard:

1. EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.EU type examination certificate (module B) issued by BSI , notified body n°0086.

2. The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

FFP2, KN95 or N95 Face Mask Usage

1. Fit testing is a critical component to a respiratory protection program whenever workers use tight-fitting respirators. OSHA requires an initial respirator fit test to identify the right model, style, and size respirator for each worker, as well as annual fit tests. Additionally, tight-fitting respirators, including the N95, require a user seal check each time one is put on. Facial hair at the sealing area of the respirator will cause it to leak.

2. Respirators require a medical evaluation before use because they can make breathing more difficult. Some conditions that could prevent respirator use include heart conditions, lung disease, and psychological conditions like claustrophobia.[8] In the United States medical evaluation is required once, prior to initial fit testing and use, though it may need to be repeated if any adverse signs or symptoms are observed.

3. For persons who are medically disqualified from negative-pressure respirators, or who cannot pass a fit test due to facial hair or other reasons, a powered air-purifying respirator is a possible alternative.

FFP2, KN95 or N95 Face Mask Material List

.