Foldable Breathing Respirator FFP2 Face Mask Disposable Great Elasticity

Foldable Breathing Respirator FFP2 Face Mask Disposable Great Elasticity

Our factory is with FDA, CE certificates, defined in FFP2, EN149:2001+A1:2009,GB 2626-2006 standard.

We have over 50 production lines for N95, KN95, disposable masks.

Our current daily capability is more than 1 million pieces of disposable face masks, 2 million pcs of N95 and KN95.

The 3 ply non-woven disposable face masks is made of 3 ply non-woven material, it is healthy and safe for you to use. Special 3 ply non-woven design, provides some protections against dust, automobile exhaust, pollen, etc. Elastic ear loop, easy to wear and no pressure to the ears.

1 . Descriptions

FFP2V Foldable Mask :High efficiency efficiency (99%) for high risk hazards. Handy sized and easily pocketed these individually packed masks hygienically fold flat when not in use. Ergonomically shaped for an efficient fit. Conforms to EN149:2001+A1:2009.

• Large surface area ensures very low breathing resistance
• New large exhalation valve which reduces heat build-up and improves wearer comfort
• Colour coded alphamesh shell for ease of identification
• Adjustable headstrap allows for a secure and comfortable fit
• Metal-free - suitable for food industry applications
• Preformed nosebridge eliminates the need for regular adjustment
• Compatible with a wide range of safety eyewear

Feature:

Anti coronavirus, anti dust and virus.
Dispsoable Great elasticity face mask, size: 17.5x9.5cm, 3-PLY.
Non woven face mask is made of spunbonded non woven fabric and meltblown non woven fabric
Low respiratory resistance, no odor, no irritation.
Use ultrasonic welding technology, comfortable wearing, breathable, hygienic, and biodegradable.

2 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.EU type examination certificate (module B) issued by BSI , notified body CE0086.
• The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals set out in Annex VII under surveillance of BSI , notified body CE0086.

3. Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.

​

4. Discard and replace the mask if:

• The mask is removed whilst in the contaminated area.
• Clogging of the respirator causes breathing difficulties.
• The mask becomes damaged.
• For respirators protecting against vapours,the smell of vapours present becomes derectable.
• When the respirator is not used,the sliding elastic bands allow to hang up the mask around the neck

We Have Shipped Millions Of N95, KN95 And Flat Disposable Masks To USA, Canada, Germany, Norway, Italy, Austria, UK, Australia, Ireland, Czech And Many Other Countries. Until Now, No Any Negotive Feedback, Zero Complaints.

Our Factory Has over 10 Production Lines And Daily Production Capacity Is Around 400,000 Pieces Of N95 And KN95, More Than 1 Million Of Flat Disposable Masks.

As For N95 Or KN95 Masks, Here Are Our Approximate Delivery Time For Your Reference.

For Less Than 10,000 Pieces, Delivery Time 1~ 2 Days.

For Less Than 50,000 Pieces , Delivery Time 3~ 4 Days.

For Less Than 100,000 Pieces, Delivery Time 5~ 7 Days.

For 200,000~ 500,000 Pieces, Delivery Time 8~ 10 Days.

For 600,000~ 1 Million Pieces, Delivery Time 11~ 15 Days.

For 1 Million~ 2 Million Pieces, Delivery Time 15~ 20 Days.

We Will Do Our Best To Save Time And Save Life For You. Become Your Trustable, Reliable And Long-term Partner With Fast Delivery On Time, High Quality With EUA Authorization, FDA, CE, FFP2 Certificates And Professional Inspection Report. As Well As Reasonable Price And Super Reputation.Welcome To Email Or Call Us.Welcome To Visit Our Factory.