
Add to Cart
High Efficiency Desand Equipmanet Potato Starch Milk Sand Remove Making Machine
Description of desand equipment
Desand machine is mainly used in removing sand ,mud from starch
slurry, cassava slurry ,potato slurry after crushing.It is widely
used in corn starch processing ,cassava starch and cassava flour
processing wheat starch processing ,sago processing ,potato starch
processing .
Advantages of desand equipment
1. There are a variety of models, according to the needs of
customers to provide the best solution.
2. Using high technology, the removal rate of starch is greater
than 98%.
3. Reasonable structure of desand machine, more conducive to water
saving.
The working principle of desand machine
Desand equipment is used to desand material based on the theory of
centrifugal separation .Because of the water inlet pipe installed
on the eccentric position of the cylinder , when water goes into
water inlet pipe through cyclone sand , firstly form downward
surrounding fluid along the surrounding tangential direction and
move down round . Water current turns upward rotation along
cylinder axis as reaches a certain part of the cone. Finally water
discharges from the water outlet pipe . The sundries fall into
bottom conical slag bucket along the cone wall under the force of
fluid inertial centrifugal force and gravity . The cone bottom has
components to prevent sundries from rising up. The sundries can
outflow under the water current effect as long as you open the
manual valve when the sundries in the slag bucket reaches a certain
extent.
Main technical parameters
Model | Material | Capacity(m3/h) | Feed Pressure | Sand Removal Rate |
CSX15-Ⅰ | 304 or nylon | 30-40 | 0.2-0.3 MPa | ≥98% |
CSX15-Ⅱ | 304 or nylon | 60-75 | 0.2-0.3 MPa | ≥98% |
CSX15-Ⅲ | 304 or nylon | 105-125 | 0.2-0.3 MPa | ≥98% |
CSX20-Ⅰ | 304 or nylon | 130-150 | 0.2-0.3 MPa | ≥98% |
CSX20-Ⅱ | 304 or nylon | 170-190 | 0.3-0.4 MPa | ≥98% |
CSX20-Ⅲ | 304 or nylon | 230-250 | 0.3-0.4 MPa | ≥98% |
CSX22.5-Ⅰ | 304 or nylon | 300-330 | 0.3-0.4 MPa | ≥98% |
CSX22.5-Ⅱ | 304 or nylon | 440-470 | 0.3-0.4 MPa | ≥98% |
CSX22.5-Ⅲ | 304 or nylon | 590-630 | 0.3-0.4 MPa | ≥98% |
Our Service
Our Workers