Ultrasonic Flaw Detector Tfd800c Plus

Ultrasonic Flaw Detector TFD800C PLUS

★User friendly dialog interactive helps operations like Calibration, making curves, etc.

★ All tools you need: DAC, AVG, AWS, Weld diagram,etc.

★ Pulse Repeatition Frequency: 10-2000Hz precise adjust, high speed scan, no miss out.

★ High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.

★ 10-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.

★ Crystal clear true-color display. Helpful user interface makes the operation much easier.

★Unlimited USB data storage.,PDF reports output.

Specifications

• Range:0-10000 mm ,at steel velocity
• Material Velocity:1000～10000 m/s
• Pulse Repetition Frequency:10-2000Hz
• Dynamic range:≥38dB
• Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
• Resolving Power:>40dB (5P14)
• Sensitivity Leavings:>65dB
• Reject (suppression): 0 to 80% full screen height
• 500 independence setup, any criterion can be input freely, we can work in the scene without test block；
• Big memory of 1000 A graph
• Test Modes: Pulse echo, dual element and thru-transmission
• Probe Types: Single Straight, Single Angle,Daul Straight, Daul Anlge,Thrugh,Creeping,Surface
• Gate Monitors: Two independent gates controllable over entire sweep range
• Units: Inch or millimeter
• Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
• Display Delay: -20 to 3400 µs
• Probe Delay/Zero Offset : 0 to 99.99µs
• Internal rechargeable Li-ion battery pack rated 7.2V at 5600 mAh
• 10 hours nominal operating time depending on display brightness
• 4 hours typical recharge time
• H×W×D(mm):240×170×38 (mm)
• Weight :1.0kg
• Operating Temperature: -10℃ to 50℃
• Storage Temperature: -30℃ to 50℃
• Pulse Energy: 200V, 300V, 400V, 500V selectable
• Rectification: Positive half wave, negative half wave, full wave, RF System
• Gate Monitors: Two independent gates controllable over entire sweep range
• Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB.
• Transducer Connections: BNC or LEMO

Functions

• Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф).
• Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
• Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity .
• Convenient to make and use DAC and AVG to evaluate the echo, the curve can be modified and compensated.
• Connectting U-disk,the unit can get unlimited memory,PDF reports out put and Upadte system.
• Weld diagram.
• There are 15 standards of in the unit.
• AWS D1.1.
• Curved Surface Correction feature.
• Crack Height Measure function.
• Magnify gate:spreading of the gate range over the entire screen width.
• Auto-gain function.
• Envelope: Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan display.
• Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
• Scan Freeze:Display freeze holds waveform and sound path data.
• Alarm:Beep and LED.
• Real Time Clock.
• Fill echo.
• Capture mark.
• Echo color within the Gate.

Base Instrument Package

• Portable Ultrasonic Flaw Detector
• Straight Beam Transducer (4 MHz, Φ10)
• Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)
• Interconnect Cable for the transducer (Q9-C5,or optional C9- C5)
• Rechargeable Li-Ion Battery Package, 8 amp hour
• Power supply/charger unit
• Operating Manual in English
• App Software
• Strap

​

TMTeck Instrument Co., Ltd.(hereafter:TMTeck) is a leading NDT manufacturers and suppliers in Beijing China and provides innovative technologies and comprehensive know-how to benefit customers in a lot of countries around the world.Till now,TMTeck has been active in the areas of technology-driven inspection solutions that deliver productivity, quality and safety.

Began from the Ultrasonic Transducers and Coating Thickness Gauge ,now TMTeck has developed more than 10 series of testing instruments, including Ultrasonic Flaw Detector, Coating Thickness Gauge,Hardness Testers,Ultrasonic Thickness Gauge ,their accessories and other NDT instruments. These products are widely used in the analysis of materials that enable our customers to monitor, control and validate their critical processes and applications,also our goods has CE certificates.

TMTeck is committed to the maintenance of long-term partnership with our clients by offering unparalleled services, technology advice and assistance. We design and produce a wide range of high performance NDT equipment and accessories. With our continued emphasis on customer focus and global competitiveness, TMTeck has always been one of the top tier of world class companies when it comes to leading in NDT equipment. And we are developing new series products according to the market demand. We can offer good guarantee for our customers.

Factory

Our Team

Customer visit