Austenitic Mirror Finish Stainless Steel Sheet 18% Chromium 8% Nickel Compostion
Brand Name:JIN LAI
Certification:ISO
Model Number:304
Minimum Order Quantity:3 tons
Delivery Time:ship within 10 days after received the advance
Payment Terms:T/T, Western Union, L/C
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
NO.21 Dongting Road,Xishan District,Wuxi ,Jiangsu,China
Supplier`s last login times:
within 41 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative
Welding
Excellent weldability by all standard fusion and resistance
methods, both with and without filler metals. Heavy welded sections
in Grade 201 require post-weld annealing for maximum corrosion
resistance.
Machining
Stainless steel tends to work harden if machined too quickly. For
this reason low speeds and constant feed rates are recommended.
Continuous casting slab or slab slab is used as raw material,
heated by step heating furnace, dewatered by high pressure water
and then into rough rolling mill. The rough rolling material passes through the cutting head and tail
and then enters the finishing mill to carry out computer controlled
rolling. After the final rolling, it is subjected to laminar cooling (computer controlled
cooling rate) and coiler winding, which becomes a straight hair
roll. The head and tail of the straight hair roll are often in the
shape of a tongue and a fishtail. The thickness and width are
poorly accurate, and the side has frequent defects such as a wave
shape, a folded edge, and a tower shape. The weight of the coil is
heavier and the inner diameter of the coil is 760 mm.
| Hot rolled plate | |||||||
|---|---|---|---|---|---|---|---|
| Specification (Thick) | Big Deviation | Normal Deviation | Small Deviation | No Deviation | |||
| 3.0mm | 2.6mm-2.75mm | 2.75mm-2.85mm | 2.86mm-2.9mm | no less than 2.9mm | |||
| 4.0mm | 3.5mm-3.6mm | 3.6mm-3.75mm | 3.76mm-3.95mm | no less than 3.95mm | |||
| 5.0mm | 4.5mm-4.6mm | 4.6mm-4.75mm | 4.75mm-4.95mm | no less than 4.95mm | |||
| 6.0mm | 5.4mm-5.6mm | 5.6mm-5.75mm | 5.75mm-5.85mm | no less than 5.85mm | |||
| 8.0mm | 7.3mm-7.5mm | 7.5mm-7.65mm | 7.65mm-7.85mm | no less than 7.85mm | |||
| 10.0mm | 9.2mm-9.3mm | 9.3mm-9.6mm | 9.6mm-9.85mm | no less than 9.85mm | |||
| 12.0mm | 11.1mm-11.2mm | 11.2mm-11.6mm | 11.6mm-11.85mm | no less than 11.85mm | |||
| 14.0mm | 13.1mm-13.2mm | 13.2mm-13.6mm | 13.6mm-13.85mm | no less than 13.85mm | |||
Hot-rolled sheet has relatively low strength, poor surface quality (low
oxidation/smoothness), but good plasticity, generally medium and
heavy plate, cold-rolled sheet: high strength, high hardness, high
surface finish, generally thin sheet, can be used as stamping With
the board.
Hot-rolled steel sheet, mechanical properties are far less than cold processing, second only to forging, but with good toughness and ductility
Hot-rolled steel sheet, mechanical properties are far less than cold processing, second only to forging, but with good toughness and ductility
Heat Resistance :
Grade 430 resists oxidation in intermittent service up to 870°C and to 815°C in continuous service. This grade may become brittle at room temperature after prolonged heating in the 400-600°C range. This effect can be eliminated by annealing.
| 430 stainless steel chemical composition | ||||||||
| Grade | C | Si | Mn | Cr | N | P | S | Ni |
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | 16.00~18.00 | - | ≤0.040 | ≤0.03 | ≤0.60 |
| 430 physical properties | ||
| 430 | Density : | 7.75g/cm3 |
| Melting point: | 1427℃ | |
| Tensile Strength: | σb (MPa)≥450 | |
| Yield strength : | σ0.2 (MPa)≥205 | |
| 410 Chemical composition: | ||||||
| C | Si | Mn | Cr | Ni | S | P |
| 0.15 | ≤1.0 | ≤1.0 | 11.5~13.5 | ≤0.03 | ≤0.04 | |
| mechanical properties: | ||||||
| Tensile strength σb (MPa) | Conditions yield strength 0.2 sigma (MPa) | Elongation % (min) | Hardness | |||
| 260 | 470 | 30 | ≤210HV | |||
Different kinds of finish sevices
Process machine
If you have any question, please feel free to contact us any time.
Austenitic Mirror Finish Stainless Steel Sheet 18% Chromium 8% Nickel Compostion
Inquiry Cart
0