12 Gauge Mirror Flat Steel Plate , Stainless Steel Panels ASTM A312
321 Excellent Weldability
Excellent weldability by all standard fusion and resistance
methods, both with and without filler metals. Heavy welded sections
in Grade 321 require post-weld annealing for maximum corrosion
resistance. This is not required for 321.
321 stainless steel is not generally weldable using oxyacetylene
321 stainless steel tends to work harden if machined too quickly.
For this reason low speeds and constant feed rates are recommended.
321 stainless steel is also easier to machine compared to 321
stainless steel due its lower carbon content.
Hot and Cold Working
321 stainless steel can be hot worked using most common hot working
techniques. Optimal hot working temperatures should be in the range
1150-1260°C, and certainly should not be less than 930°C. Post work
annealing should be carried out to induce maximum corrosion
resistance. Most common cold working operations such as shearing,
drawing and stamping can be performed on 321 stainless steel. Post
work annealing should be carried out to remove internal stresses.
Hardening and Work Hardening
321 stainless steel does not harden in response to heat treatments.
It can be hardened by cold working, which can also result in
321 Stainless Steel sheet
|Chromium||17.00 min. –19.00 max||17.00 min.–19.00 max.|
|Nickel||9.00 min.–12.00 max.||9.00 min.–12.00 max.|
|Carbon||0.08||0.04 min.– 0.10 max.|
|Titanium||5 x (C + N) min.–0.70 max.||4 x (C + N) min.–0.70 max.|
in 2 in.
|Hot rolled plate|
|Big Deviation||Normal Deviation||Small Deviation||No Deviation|
|3.0mm||2.6mm-2.75mm||2.75mm-2.85mm||2.86mm-2.9mm||no less than 2.9mm|
|4.0mm||3.5mm-3.6mm||3.6mm-3.75mm||3.76mm-3.95mm||no less than 3.95mm|
|5.0mm||4.5mm-4.6mm||4.6mm-4.75mm||4.75mm-4.95mm||no less than 4.95mm|
|6.0mm||5.4mm-5.6mm||5.6mm-5.75mm||5.75mm-5.85mm||no less than 5.85mm|
|8.0mm||7.3mm-7.5mm||7.5mm-7.65mm||7.65mm-7.85mm||no less than 7.85mm|
|10.0mm||9.2mm-9.3mm||9.3mm-9.6mm||9.6mm-9.85mm||no less than 9.85mm|
|12.0mm||11.1mm-11.2mm||11.2mm-11.6mm||11.6mm-11.85mm||no less than 11.85mm|
|14.0mm||13.1mm-13.2mm||13.2mm-13.6mm||13.6mm-13.85mm||no less than 13.85mm|
How Can You Ship Goods Like Heavy welded Stainless Steel pipe. What
Is Best Pacakge?
- Packing is quite important especially in a case of international
shipments in which consignment pass through various channels to
reach the ultimate destination, so we put special concern regarding
- We pack our goods in numerous ways based on the products. We pack
our products in multiple ways, such as,
- Waterproof paper reinforcement of steel strip
- Kraft paper
- Carton boxes
- Wooden pallets
- Wooden boxes
- Wooden crates
Different kinds of finish sevices
If you have any question, please feel free to contact us any time.