ASTM D1264 Water Washout Characteristics Tester For Grease Testing
Brand Name:AI
Certification:ISO
Model Number:AIC-1264
Minimum Order Quantity:1 set Water Washout Characteristics Tester
Delivery Time:30 days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Changsha Hunan China
Address:
Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China
Supplier`s last login times:
within 30 hours
Product Details
Company Profile
Product Details
Corrosion-Preventive Properties Test Instrument
Introduction:
This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report.
Features:
1.The case of Water Washout Characteristics Tester is made of good
quality glazed steel plate,which is reliable.
2.The bearing chamber and case can meet requirements of standard
completely.
3.The stainless steel tand has inlet and outlet pipes,the bearing
chamber is aluminum,copper chromium circulating pump,1/4 HP motor.
4.The heater is stainless steel.
5.The temperature controller is integrated with tempeature
controlling and display.It also has micro-processor PID
controller.The accuracy is ±0.1°C,tempeature probe is PT100
RTD,working tempeature is ambient~100°C.The working tempeature is
usually 37.8 ± 0.1°C and 79 ± 0.1°C.
6. The rotation speed of motor with belt is 600 ± 30 rpm.
7.The design of motor and belt can start the circulating pump with
start measuring bearing.
8.The regulator and by-pass valve can adjust the flow rate of 1mm
capillary to 5 ± 0.5 ml/s.
Specifications:
| Applicable standards | ASTM D1264 |
| Temp.control and display accuracy | ±0.1°C |
| Working temperature | ambient~100°C |
| Usual working temperature | 37.8 ± 0.1°C and 79 ± 0.1°C |
| Rotating speed of motor with belt | 600 ± 30 rpm |
| Flow rate of capillary | 5 ± 0.5 ml/s |
| Total power consumption | 600W |
| Powr supply | 220 V/50 Hz |
ASTM D1264 Water Washout Characteristics Tester For Grease Testing
Inquiry Cart
0