SMMSS Composite Permeable Film Protective Isolation Clothing
Brand Name:Factory Brand Or Customers Brand
Certification:CE FDA
Minimum Order Quantity:10000
Delivery Time:3 Days After Full Payment
Payment Terms:TT
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Room 306, Building B, Southeast Industrial And Trade Bldg, No. 25 Houhai Rd, Nanshan District, Shenzhen, Guangdong, China
Supplier`s last login times:
within 28 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Level 4 protective isolation clothing, SMMSS+ Composite Permeable film + Composite Permeable film material
| Size of Isolation Wear | ||||||
| Number | Chief | Length of sleeve | Chest circumference | Belt belt | Collar Exposed | Deviation |
| M code | cm 120 | cm 84 | cm 130 | cm-180cm 160 | cm 30 | ±5% |
| L code | cm 120 | cm 94 | cm 140 | cm-180cm 170 | cm 30 | ±5% |
| XL code | cm 120 | cm 96 | cm 150 | cm-185cm 170 | cm 30 | ±5% |
| Fabric fabric | Gram/m2 | Process | cuffs | Neckline | Rear collar | Belt belt | Sterilization | Pressure tape | Level |
| SSPP non-woven composite breathable moisture permeable film+g45PPPE | g45+g20 | Sewing | Threaded sleeve | Sewing | Magic post | 4 | Sterilization | Yes | Level 4 |
| SMMSS non-woven fabric+g45PPPE | g45+g20 | Ultrasonic ultrasound | Threaded sleeve | Sewing | Magic post | 4 | Sterilization | Yes | Level 4 |
TYPE: LEVEL 4
Resistance against penetration of Phi-XI 7 4
bacteriophage[Material)
Test Method: ASTM F1671/F1671M-2013
Test principle:
A specimen is sut才ected to a nutrient broth containing a virus for
a specified time and pressure sequence. Visual detection of
penetration is supplemented with an assay procedure that will
detect viable viruses which penetrate the material even when liquid
penetration is not visible. Any evidence of viral penetration for a
test specimen constitutes failure.
Test equipment:
Hydrostatic tester
Incubator
Electronic balance
Autoclave
Retaining screen
The environmental conditions of the laboratory and test condition:
Pretreatment: Condition the test specimens at 24.5℃a让at 56% RH for
more than 24 h
Culture Medium: top agar and bottom agar
Dimensions of the test specimens:75mmx75mm
Culture temperature: 36℃, Culture time: 6～18 h
Use retaining screen
Test virus: phi-XI 74 bacteriophage
Assay titer: 2.0× 108 PFU/ml
1. name: disposable use of isolation clothing (rubber band cuff)1, needle distance :3 CM not less than 8 needles
2. color: blue color 2, lock side car thread head: can not exceed 1.5 CM;.
3. cloth: drench film cloth 35g (15/20) to 40g (15/25)3, flat end: no more than 1 CM
4. size :120* wide 145 CM L code 4, product process positive and negative difference :2 CM
5. sleeve length :63 CM 5, Production process according to the following drawing size:
6. waistband length :175-185 CM 6, folded according to the following drawing size
7. tie exposed :30 CM 7,100 pieces per case ,10 pieces per bag.
8. products clean, no stains, hair, mosquitoes and other debris
Open material:
body piece (rectangle):1.24 M*1.48M sleeves (ladder type)64*32*64 CM.
Performance indicators
1 Quality per unit area
A unit area mass of nonwovens used in isolation clothing shall not
be less than 35 g/m2 .
2 Surface moisture resistance
For nonwovens used in isolation clothing, the water level shall not
be lower than the level 3 in the GB/T4745-2012.
3 Fracture strength
3.1 Fracture strength - dry
The dry breaking strength of nonwovens used in isolation clothing
should ≥20 N.
3.2 Fracture strength - Wet
Wet breaking strength of nonwovens used in isolation clothing
should ≥20 N
SMMSS Composite Permeable Film Protective Isolation Clothing
Inquiry Cart
0