Customized Logo Carbon Filter Dust Mask , Activated Charcoal Dust Mask Gray Color

Customized Logo Carbon Filter Dust Mask , Activated Charcoal Dust Mask Gray Color

1 . Descriptions

COMFORTABLE&SOFT
4 layers virgin non woven fabric,45g hot air makes mask soft and puffy ,comfortable to touch skin, carbon layer is anti odors.

3D MODELL ING
Three- Dimentional,imitate the shape of nose and mouth,perfectly wrapping people's mouth and nose.

THE VALVE'S WORKING PRINCIPLE
it is close when inhale,so outside particles couldn't flow in.It is open when exhale to wipe out the air emissions and help breath easily.

NOSE CLIP&NOSE FOAM
Nose foam prevents leakage and provide twice protection. Nose foam is made of sponge.It is comfortable to settle nose foam on nose bridge.

2 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

3 . How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator performance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

4 . Packing

Normal Packing 12pcs/box,240pcs/ctn.

5 . FAQ

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

6. More pictures

Beijing Global Dowin Technology Co.,Ltd., established in 1999,is the comprehensive high-tech enterprise of specializing in Research and Development, Manufacturing, Sales and Service for Intelligent Smart Care Products.

Our group are professional in making Non-woven products, such as face masks, caps, coveralls etc. widely used in Food handing; Scientific research; medical health; chemical engineering; Electronics industry etc. fields. By virtue of all staff's diligent contribution to the group, we are successfully bringing our products to over 60 countries and areas, mainly to Europe, Australia, South America etc.