Product Details
Waterproof Activated Carbon Dust Mask With Two Head Straps CE
Approved
1 . Descriptions
Dust Mask with two head-straps provides comfortable & secure
seal,nose clip individually adjustable nose clip for excellent fit.
In compliance with the norm EN 149:2001+A1:2009 ,PPE III CATEGORY
and Shell-shaped
2 . Material of each layer
Outer layer : Protective pp spun-bonded non-woven
Middle layer : FFP2 melt blown filter(have filter efficiency level
of 80%)
Middle layer :Active Carbon filter (MX-2008)
Inner layer : Shaped needle punched cotton
3 . Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
4 . How to use?
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
5. Points for Attention
1. This product is prohibited to be used with damaged package;
2. Do not use in atmospheres containing less than 19.5% oxygen, as
this respirator does not supply oxygen; Not for use in oil mist
atmospheres;
3. If the product becomes damaged, soiled, or breathing becomes
difficult, leave the contaminated area immediately and replace the
product;
4. This product is one-time use only and can not be washed;
5. This product should be stored in a clean, dry and ventilated
environment with relative humidity less than 80% and without
harmful gas.
6 . More pictures
Company Profile
Beijing Global Dowin Technology Co.,Ltd., established in 1999,is
the comprehensive high-tech enterprise of specializing in Research
and Development, Manufacturing, Sales and Service for Intelligent
Smart Care Products.
Our group are professional in making Non-woven products, such as
face masks, caps, coveralls etc. widely used in Food handing;
Scientific research; medical health; chemical engineering;
Electronics industry etc. fields. By virtue of all staff's diligent
contribution to the group, we are successfully bringing our
products to over 60 countries and areas, mainly to Europe,
Australia, South America etc.