C30 Concrete Adhesive Anchoring System 420ml 2:1 For Thread Rod

Long Term Load Stability Adhesive Anchoring System 420ml 2:1 For Thread Rod

Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.

Item #: FixingChor142

Capacity: 420ml

Materials: Epoxy

Mixing Ratio: 2:1

Product Description:

Adopted with modified epoxy resin and composite materials, XQ-IME Injection Anchoring Adhesive is a two-component, Styrene Free system for use as a high strength, non-shrink anchor grouting material. Its advantage on steel bar planting has been proved by many testimonies. Compares with other adhesive, it is a new high performance, Eco-friendly anchoring adhesive which has strong bonding strength and high efficiency as well as irritation free and low odor.

Key Features

Design flexibility permitted for sustained load performance at elevated temperature Job site versatility can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 150°F (65°C)

Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318

Easy hole-cleaning, no power-brushing required

1:1 two-component, high-solids, epoxy-based anchoring adhesive formula

When properly mixed, will be a uniform teal color

Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry

Suitable for use in dry or water-saturated concrete

Use with threaded rod or rebar

Substrate installation temperature from 50°F (4°C) to 110°F (38°C)

In-service temperature range of –40°F (–40°C) to 150°F (65°C)

For best results, store between 45°F (7°C) and 90°F (32°C)

Shelf life of 24 months

Volatile Organic Compound (VOC) –3 g/L

Technical Parameter:

1. Basic parameters

1) Appearence

Part A (main): white cream

Part B (hardener): red cream / grey cream

2) Mixed Viscosity: 18-22Pa.s

3) Hardened density: 1.50±0.10g/cm³

4) Mixing ratio (Volume ratio): 650ml(1:1)

5) Shelf time: 24 months

2 Main Performance

3 Technical Data

Anchoring Adhesive used with thread rod

Anchoring Loading Capacity of rebar to C30 concrete (designed value KN)

Actual Tensile Strength (KN)

Grade II rebar f_y=310 N/mm (designed), f_y=310 N/mm (standard)

Concrete: C30

Processing Method

1 Tools

• Electric hammer
• Hole cleaning brush
• Air compressor
• Glue gun

2 Attention

• Drill as per requested hole dia. and depth
• Clean the hole completely
• Inject from the bottom of the hole and pull out the gun slowly.
• After planting the bar, let the gel harden in still.

• Processing Flow

Drilling: As per technical data

Cleaning: using pump or compressed air and brush to clean the hole completely.

Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

Bar planting: spin slowly the bar or screw into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it hardened completely.

Curing time:

Consumption Chart (holes per cartridge)

Packaging:

• One cartridge with one mixer in carton
• 12pcs/20pcs/30pcs per carton.
• Xinchor label or your own label.
• EXP Date on the top of cartridge.
• Customized Packing.

Shipping:

• Shipments can be arranged by sea, air, courier express.
• Courier express includes DHL, FedEx, TNT, UPS, EMS, SF, etc.

Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive.

Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 hours driving from Shanghai Pudong Airport, as well as we have sales branches throughout China, we passed ISO9001-2008 certificate in 2010.

As the earliest reinforcement material providers, we have our products wide range applied to high-speed railway, nuclear power station, bridge, tunnel, subway, municipal and civil buildings, and maintain a long-term cooperative relationship with a number of well-known construction companies. As a professional manufacturer of reinforcement materials, with company spirit of "quality first, integrity management" purposes, we can provide good quality products for building and industry at home and abroad.

You are welcome to contact us, we would be delighted to be of service, providing advice and professional building reinforcement solutions.