400x72.5wx76 450x83.5kx74 300x52.5x86 Rubber Tracks Pads For Hyundai Robex 35z-9 60cr-9 80cr-9a Excavators Track Shoes

400x72.5wx76 450x83.5kx74 300x52.5x86 Rubber Tracks Pads For Hyundai Robex 35z-9 60cr-9 80cr-9a Excavators Track Shoes

Rubber pads
Rubber shoes and pads are designed to improve the traction and stability of excavators on all types of terrain, especially hard finished and abrasive surfaces, reducing noise and vibration.

Easy-on and easy-off track pads are perfect for temporary use on varied surfaces. Recommended for customers looking for pads that last for years, not seasons.

track pads come in two convenient mounting styles: bolt-on and clip-on. Both are easy to install and remove. These actions can be done quickly on-site, with no special knowledge.and we can customize a pad for your specific needs.

What are rubber pads used for on an excavator?
Rubber pads are designed specifically to attach to the existing mounted steel tracks of an excavator. Whilst most compact tracked equipment is usually mounted on rubber tracks, larger excavators will generally sit on steel tracks. Rubber pads are used to produce fewer vibrations and noise while operating the machinery. But why should this matter? Producing fewer vibrations and noise can allow machines to reduce their overall effect on the area you are working on.

Features

Unlike most competing products, koko shop Track Pads fit between the grousers bars of the steel shoe, preventing the pads from slipping
Pads are attached to the steel shoe, not to the machine
Available in two types of mounting configurations: clip-on track pad and bolt-on track pad
The clip-on track pad attaches directly to the steel grouser shoe either by a bolt-on bracket at each end, or by a slip-over yoke at one end and a bolt-on bracket at the other
The bolt-on track pad has threaded studs bolted through pre-drilled holes in the grouser plate.
Special non-marking white rubber compound is available upon request for any appliCATEEEEion

Quality retention
The most important thing about a rubber track pad is the adhesion of the pad’s rubber to the steel. For optimal adhesion of the pad, a coating must be applied to the steel. This coating ensures that any rusting process in the steel is reduced to a minimum. If the coating is not done, or not done properly, cracks may form. This may cause the pads to come loose. In short, the coating prevents unnecessary wear to the steel tracks with rubber track pads.

How can you recognise the wear patterns of rubber track pads?

Rubber track pads are used when the substrate, e.g. the asphalt or pavement, may not be damaged. If the steel parts protrude through the rubber due to pad wear, then it is time to replace them. If they are not replaced, the steel parts will still damage the substrate.

Koko Shop Machine Co.,Ltd (Huilian Machinery) found in 2011, is a professional supplier who is specializd in construction machinery parts for excavator and attachments, including Hydraulic Hammer, Hydraulic Breaker Spare Parts, Quick Coupler, Hydraulic Grab, Ripper, Vibrator, etc. And, Excavator parts Engine, Hydraulic Pump, Swing motor, Travel motor, Main control Valve, Swivel Joint, Hydraulic seal kit. After 12 years developments, Huilian Machinery factory make quality parts with it's advance technology and advance machines. Hydraulic Breaker Parts suitable for: Atlas copco, Soosan, Furukawa, Atlas Copco, Alpha, Bretec, BTI, CATEEEEEE, CP, Daemo, DMB, Alicon, D&A, Doosan, EDT, Epiroc, Everdigm, Fine, Furukawa, General GB, Hammeroc HR, Hyundai HDB, Indeco HP MES, JCB, Kent, KCB, Komac, Komatsu JTHB, JKHB, Korota, Krupp, Kwanglim, Konan, Montabert, MSB, MTB, Noah, NPK, Okada, OKB, Omal, Poqutec, Powerking, Promove, Rammer, RB Hammer, RBI, Rhino, , Soosan, Stanley, Teisaku, T&H, Toku, Toyo, UBTECH, ECand so on. Hydraulic Excavator Parts suitable for: Komatsu, Hitachi, EC, Hyundai, Kobelco, Sumitomo, Kato, Doosan, JCB, cx, Sany, Liugong, XCMG, Xugong, Zoomlion, etc. OEM and ODM service offered.

In order to meet different customers' needs, Huilian Machinery also purchases Genuine Parts from German, Japan, Korea. And we established a long-term business relationship with customers from all over the world, like: U S A, Mexico, Saudi Arabia Kenya, Algeria, UAE, Russia, Morocco, etc. In 2023, Huilian Machinery became Distributors of easywork engineering machinery (SANY Group) in Russia and indonesia.

Koko Shop Machine is continuously seeking the chances to meet all the friends both from home and abroad for win-win cooperation.

And we believe that quality parts will take us to a further place. Let’s build a better tomorrow, together!

Introduction to Koko Shop Company

CertifiCATEEEEions

Enteprise Honor

Service Brand

Our Factory

Koko Shop Machine Management Department is an important control method for processing quality. It equipped with the most advanced inspection equipments The professional control devices,it can provide accurate reference data to choose the most suitable material and accessories, which also effectively control parts quality. Besides, it also provides digital information for engineers and quality controller to determine feasibility for spare parts after processing. This is the working processing of quality control.

Chooing steady quality supplier. After purchasing raw material, duing testing if it is proved well, then we will arrange these eligible matrial that come into warehouse.

When the spare parts finish and come into testing working conditon. Every worker will be responsible for their spare parts. They will give out fact testing date and results. After proving testing date is accord with delivery standard. Then Koko Shop Machine Quality Management Department will allow these spare parts that go to packing department and packing.

Before delivery, Koko Shop Machine Quality Management Department should check all mark and packing conditon. If it is prove it is accord with exporting standard and customer's requirement. Then they will allow these equipment come into fininshed product area.

Of course Koko Shop Machine Quality Management Department have the right to make sample testing for every production step to make sure product quality.