PC200 PC210 PC220 PC230 PC240 Excavator Attachment Rotary Hydraulic Grab Bucket Grapple

Product AppliCATEEEEEEEEion
1. Log grabbing,moving and organizing.
2. Stone grabbing,moving and organizing.
3. Other large scraps grabbing,moving and organizing.

How to choose the grapple model?
1. What is your excavator model or tonnage?
2. What material do you want to grab? Stone, wood, Rubbish or something else?

PC200 PC210 PC220 PC230 PC240 Excavator Attachment Hydraulic Grapple Bucket Rotary Hydraulic Grab Bucket Grapple

Product Maintenance
1.Daily checkpoint: Whether there is any damage or deformation of the body, hose interface leakage, damage to the pin and bushing and its replacement
cycle,check the oil level of the gear, check the bolt and nut, the gear
tightening loose state.
2.Conventional checkpoint: The seals and rotating parts of the hydraulic
cylinder will wear out, and should be replaced in time after reaching the
service life. Replacement parts should be matched with the original factory. Check the rotating shaft in 360 degrees,whether easy to work from any
Angle, check that there is enough lubricant on the rotating shaft and bolts
are tight enough.
3. Check the tightening state of bolts, install new bolts, check 8 hours after
use, and ensure that the tightened bolts are not loose. Damaged bolts
should be replaced in time. Bolts should be replaced after approximately
1500 hours or 12 months of use after installation.
4. It is recommended to check whether there is oil leakage regularly to
ensure that there is no fault and the product can run smoothly. Every 4 hours: fill lubriCATEEEEEEEEing oil, lubriCATEEEEEEEEe shaft pin and rotating gear once;
Every half year or 1000 hours (whichever comes first) : Replace the hydraulic
cylinder oil seal and motor oil seal once.

Our Hydraulic Rotary Steel Grapple Product SpecifiCATEEEEEEEEion

Product Features



We Can Supply Following Excavator Model Attachments

Koko Shop Machine Co.,Ltd (Huilian Machinery) found in 2011, is a professional supplier who is specializd in construction machinery parts for excavator and attachments, including Hydraulic Hammer, Hydraulic Breaker Spare Parts, Quick Coupler, Hydraulic Grab, Ripper, Vibrator, etc. And, Excavator parts Engine, Hydraulic Pump, Swing motor, Travel motor, Main control Valve, Swivel Joint, Hydraulic seal kit. After 12 years developments, Huilian Machinery factory make quality parts with it's advance technology and advance machines. Hydraulic Breaker Parts suitable for: Atlas copco, Soosan, Furukawa, Atlas Copco, Alpha, Bretec, BTI, CATEEEEEE, CP, Daemo, DMB, Alicon, D&A, Doosan, EDT, Epiroc, Everdigm, Fine, Furukawa, General GB, Hammeroc HR, Hyundai HDB, Indeco HP MES, JCB, Kent, KCB, Komac, Komatsu JTHB, JKHB, Korota, Krupp, Kwanglim, Konan, Montabert, MSB, MTB, Noah, NPK, Okada, OKB, Omal, Poqutec, Powerking, Promove, Rammer, RB Hammer, RBI, Rhino, , Soosan, Stanley, Teisaku, T&H, Toku, Toyo, UBTECH, ECand so on. Hydraulic Excavator Parts suitable for: Komatsu, Hitachi, EC, Hyundai, Kobelco, Sumitomo, Kato, Doosan, JCB, cx, Sany, Liugong, XCMG, Xugong, Zoomlion, etc. OEM and ODM service offered.

In order to meet different customers' needs, Huilian Machinery also purchases Genuine Parts from German, Japan, Korea. And we established a long-term business relationship with customers from all over the world, like: U S A, Mexico, Saudi Arabia Kenya, Algeria, UAE, Russia, Morocco, etc. In 2023, Huilian Machinery became Distributors of easywork engineering machinery (SANY Group) in Russia and indonesia.

Koko Shop Machine is continuously seeking the chances to meet all the friends both from home and abroad for win-win cooperation.

And we believe that quality parts will take us to a further place. Let’s build a better tomorrow, together!

Introduction to Koko Shop Company

CertifiCATEEEEions

Enteprise Honor

Service Brand

Our Factory

Koko Shop Machine Management Department is an important control method for processing quality. It equipped with the most advanced inspection equipments The professional control devices,it can provide accurate reference data to choose the most suitable material and accessories, which also effectively control parts quality. Besides, it also provides digital information for engineers and quality controller to determine feasibility for spare parts after processing. This is the working processing of quality control.

Chooing steady quality supplier. After purchasing raw material, duing testing if it is proved well, then we will arrange these eligible matrial that come into warehouse.

When the spare parts finish and come into testing working conditon. Every worker will be responsible for their spare parts. They will give out fact testing date and results. After proving testing date is accord with delivery standard. Then Koko Shop Machine Quality Management Department will allow these spare parts that go to packing department and packing.

Before delivery, Koko Shop Machine Quality Management Department should check all mark and packing conditon. If it is prove it is accord with exporting standard and customer's requirement. Then they will allow these equipment come into fininshed product area.

Of course Koko Shop Machine Quality Management Department have the right to make sample testing for every production step to make sure product quality.