0.5Hz Medical Device Testing Equipment Needle Tube Toughness Tester

Medical needle tube (needle) toughness tester

Product Description:

The medical needle tube (needle) toughness tester is designed and manufactured according to the relevant provisions of gb18457-2015, (eqviso9626-1991) "manufacturing medical stainless steel". It is specially used to test the toughness of medical needle.

Product introduction:

Rx9626-d medical needle (needle) toughness tester is composed of intelligent controller, positioning mechanism, swing mechanism, fixture and so on. The intelligent controller is composed of CPU, motherboard, LCD screen, power supply and so on. The whole machine has a high degree of automation. After the tested object is installed, the user can automatically complete all operations by pressing the only operation key.

It adopts 5.7 inch (120 × 90) LCD screen Chinese menu display, touch operation: tube wall: normal wall, thin wall and ultra-thin wall

Nominal size of needle tube: 0.2-3.4mm;
Test frequency: 0.5Hz;

Rocker arm swing bending angle: 15 °, 20 ° and 25 ° three positions, the switch sets the bending angle, and 4-bit high brightness LED display;

Bending distance: 6-31.5mm, accuracy: ± 0.1mm (10 specifications);
The number of experiments: two-way force was applied 20 times.

Net weight: 10kg

Overall dimension: 300 × 240 × 240 (mm)

The instrument will be upgraded free of charge according to the national standard
technical parameter

Environmental Science

Working temperature: 5 ～ 40 ℃
Relative humidity: 45-80%
Power supply voltage: 220 V ± 22 V
Power grid frequency: 50 Hz ± 1 Hz
Equipment type: type I, type B
Display mode
Four high brightness LED liquid crystal display is adopted.
Three position switch is used to set the bending angle of the measured object.
Power consumption: 200va
Experimental frequency: 0.5Hz ± 0.025hz.
Bending angle: 15 ℃, 20 ℃, 25 ℃, and the error shall not be greater than ± 2 ℃
The force was applied in both directions for 20 times.

Related accessories:

Printing paper, weight

Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and maintenance of automation equipment; and other high-tech enterprises. And have strong R & D capabilities in the field of test instrument industry. The testing equipment developed by the company is widely used in many industries such as electronics, home appliances, etc.

We have strong technical reserves and solid technical strength, especially in the field of environmental testing equipment or product online monitoring. The newly developed products are used in aerospace, aerospace, nuclear industry and other projects.

Looking forward to your inquiry and negotiation.