Aluminum Vessel Appliance Test Equipment For Hot Plates Test HJ0630
Brand Name:KeRang
Certification:Calibration Certificate (Cost Additional)
Minimum Order Quantity:1 SET
Delivery Time:30 days
Payment Terms:L/C,L/T
Name:Vessel For Hotplates Test HJ0630
Contact Now
Add to Cart
Active Member
Location:
Shanghai Shanghai China
Address:
Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China
Supplier`s last login times:
within 31 hours
Product Details
Company Profile
Product Details
Vessel For Hotplates Test HJ0630
Standard: This device meets the standard of IEC60335-2-9 clause 3.1.9.108 figure 103 and figure 104,Household and similar electrical appliances-Safety-Part 2-9:Particular requirements for grills, toasters and similar portable cooking appliances.
Application: It is used to simulate the vessel is placed on the hotplates in normal operation.
Test sample:Hotplates.
Parameters:
Aluminum vessel:Made of aluminum,flat base with cover, meet the requirements of table 101 quantity of liquid in the vessel, mainly used for water boiling test.
Table 101-Quantity of liquid in the vessel
Diameter of cooking zone mm | Quantity of water or oil l |
| ≤110 | 0.6 |
| ＞110 and ≤145 | 1.0 |
| ＞145 and ≤180 | 1.5 |
| ＞180 and ≤220 | 2.0 |
| ＞220 and ≤300 | 3.0 |
| Diameter of cooking zone mm | Approximate dimension | ||
| a mm | b mm | c mm | |
| ≤110 | 110 | 140 | 8 |
| ＞110≤145 | 145 | 140 | 8 |
| ＞145≤180 | 180 | 140 | 9 |
| ＞180≤220 | 220 | 120 | 10 |
| ＞220≤300 | 300 | 100 | 10 |
NOTE: The maximum concavity of the vessel is to be not more than 0.05 mm. The base of the vessel is not to be convex.
Steel vessels: The vessel is made of low carbon steel having a maximum carbon content of 0.08%. It is cylindrical without metallic handles or protrusions. The diameter of the flat area of the base of the vessel is to be at least the diameter of the cooking zone. The maximum concavity of the base of the vessel is 0.006d. The base of the vessel is not to be convex. A3 low carbon steel, surface: black oxidating. meet the requirements of table 101 quantity of liquid in the vessel and figure 104 parameters requirement (Φ110mm, Φ145mm, Φ180mm, Φ220mm, Φ300mm,1 set with 5 pcs), mainly used in cooking oil heating test.
Aluminum Vessel Appliance Test Equipment For Hot Plates Test HJ0630
Inquiry Cart
0