BS EN S355 Steel 5G Cell Tower For Cellphone Signal Transmission And Reception

BS EN S355 Steel 5G Cell Tower for Cellphone Signal Transmission and Reception

1. Production decription

Techopedia explains Cell Tower

Cell towers are usually placed so that they can cover a wide area. The working range of a cell tower depends on many factors, such as:

• Rated power of the transmitter
• Frequency of signal
• Height of the antenna above its surroundings
• Required uplink/downlink data rate of the customer’s device
• Reflection or absorption of radio energy by nearby buildings or vegetation
• Weather conditions
• Geographical or regulatory factors

Cell towers are grouped in geographical locations where the population density is high and there are likely to be large numbers of cell phone users. This helps in avoiding saturation of the available capacity, which could result in busy signals and unhappy consumers. Cell phones are designed to be aware of the nearest tower. This is shown to the user in the form of signal strength, which represents the connectivity strength between the user’s location and the nearest tower providing the service. When a user makes a call, the radio signal emitted searches for the nearest tower. The receiving antenna of the cell tower then picks up the radio signal and starts the process of finding the caller. Once found, the radio signals are transmitted back to the user and the communication is established with back-and-forth passing of the radio signals.

The primary function of a cell tower is to ensure proper elevation to antennas that receive and transmit radio-frequency signals from cell phones and other devices. Sometimes to accommodate community aesthetic concerns, cell towers are camouflaged to resemble trees or flagpoles. For basic functioning, cell towers are expected to be adjacent to a road for physical access with availability of telecommunications network connectivity and electrical power. Mobile service providers usually configure adjacent cell towers to make use of different frequencies. This helps in avoiding any “confusion” among handsets about which tower antenna to be used for connection.

Catalogue of certificatge as followings :

Terms and condition:

Price Term: EXW, FOB, CFR or CIF, FCA and so on

Shipping port: Qingdao port

Payment Term: Usually 30% by T/T as deposit balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.

Delivery Time: Usually 30 days after PO/drawing/prepayment confirmed.

Package: Normally we use steel wire to make the angle into bundle ,then use special material to protect the zinc, or according to client’s requirement.

Please provide drawings if you have so that we can calculate the accurate price for you.

We also provide design according to your requests, if you don't have drawings.

2. Production capacity

​

3. Technical support

​

4. Quality Control

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

We usually has two ways of trial assembly: trial assembly before galvanzation and after galvanization

6. Hot dip galvanization and painting

7. Package and delivery

8. Company introduction

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2005,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

9. Product catalogue:

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers ‘requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• - Environmental Management System Certificate: ISO14001:2015
• - Quality Management Systems Certificate: ISO9001:2015
• - Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

Welcome to contact us ,we make sure your every question will be answered in time .