Home /Passive Components /

Embedded RFID Card Reader Writer Module Support Contact Contactless Compliant NFC Tags

Embedded RFID Card Reader Writer Module Support Contact Contactless Compliant NFC Tags

Brand Name:rCloud
Certification:CE
Model Number:RCR-3302
Minimum Order Quantity:1PCS
Delivery Time:5-8 work days
Payment Terms:T/T, Western Union,Paypal, L/C
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 206, Qiaotou Community, Fuyong Street, Baoan District, Shenzhen, China
Supplier`s last login times: within 17 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

All In One Magnetic Stripe Reader Module Support Contact Contactless Smart Card Writer Compliant NFC Tags

Overview

RCR-3302 ( former as RFM-13X series )is a high-performance embedded RFID card reader/writer module, read and write Mifare1 (S50 and S70), ISO 14443A/ B, ISO 15693 series card, with one SAM slot, RS232/USB/TTL interface for optional. It can be widely applied in the industries of attendance system, access control, public transportation, and any other terminal systems.


Main interface J1(6*2.0mm)

Used for RS232 and USB communication, Pin definition description:

Pin1 ---- GND

Pin2 ---- VCC (DC+5V)

Pin3 ---- GND

Pin4 ---- RS232.RX or RS485.B or USB.D+

Pin5 ---- RS232.TX or RS485.A or USB.D-

Pin6 ---- GND

Data packet format

There is three kinds of data packet: packet head, data block, command. When a USB command length is over 64byte, it will adopt separating packet transmission, the separated command is resealed by new data packet, it is called data block. It should send packet head at first before sending data block, packet head contains the detailed information of sending data block.


Specification

Voltage+5VDC (± 5%)
Current<120mA
Card typeRead and Write Mifare1 (S50, S70) ,ISO14443A/B,ISO15693,Smart card
DistanceType A: 0~8cm,type B: 0~5cm,ISO15693: 0~10cm
InterfaceRS232/RS485, TTL, USB HID
Baud rate9600(default)~115200 BPS
TemperatureOperating: 0°C ~ + 60°C Storage: -20°C ~ + 60°C
HumidityOperating: 5% ~ 95% RH Storage: 20 %~ 90% RH
Dimension100mm ( L ) x 50mm ( W ) x 10mm ( H )

Data packet content definition:

NameLengthInstructions
Packet block1byte0x2
Block length1byte
Packet ID1byte
Block S/N1byte
DataBlock length minus 2bytessplit command
Check sum1byteAll of bytes sums according to bit XOR from block length to data.

A maximum length of frame data is 64 byte except packet head, data length and check three data, transmission maximum data number is 61 byte. When transmitting data is over 61 byte, it need to transmit data via split packet. When transmitting via split frame, interval time between two frames should be not less than 2ms.

CMD_SetRF

Function description: Turn on or off the antenna carrier

Instruction code: 0x2A

Input parameters: status value

Return parameters: status word

Compatible with low version command format:

Packet headDevice AddrPacket LenCommand codeStatus vauleCheck
1 byte1 byte1 byte1 byte1 byte1 byte
0x02xx0x020x2A0/1check

Command instruction :A status value of “0 “indicates that the off carrier status value is 1 to turn on the carrier.

Command intruction:

1.Choice :1 “means to control Red LED, “2” means to control Green LED, “3 “means to control Red LED and Green LED.

2.Time :The unit is 100ms, the value range is 1-10, a control period is 1s, if the overtime is set to 1, it means the LED is on 100m, stop 900ms.

3.frequency:Indicates the number of LED control loops. When the number of times equals 0xFF, it indicates continuous flashing until there is an instruction to change it. If the "time" is 10 and the "times" is 0xFF, the LED is always on. If the "times" is 0, the LED is off regardless of the "time" value.


Shipment


China Embedded RFID Card Reader Writer Module Support Contact Contactless Compliant NFC Tags supplier

Embedded RFID Card Reader Writer Module Support Contact Contactless Compliant NFC Tags

Inquiry Cart 0