Add to Cart
4 MHz RFID PC/SC manual smart hybrid card reader plastic bezel with 424kbps game system ISP online download supported
Overview
RCR-2672-PCSC is the perfect peripheral for your smart card application. It is easy to install, use, and integrate into a computer-based environment. It is compatible with PC/SC and CCID, and its drivers are compatible with operating systems such as Windows, Linux, Mac OS, and Solaris.
In addition, the RCR-2400-PCSC is now available on mobile devices running Android TM 3.1 and later.
Introduction
RCR-2672 is a PC-linked contactless smart card reader/writer used for accessing ISO 14443-4 Type A and Type B, MIFARE®, ISO 18092, and FeliCa tags. The RCR-2672 is PC/SC compliant making it compatible with existing PC/SC applications.
The RCR-2672 serves as the intermediary device between the computer and the contactless tag via the USB interface. The reader carries out the command from the computer whether the command is used to communicate with a contactless tag, or control the device peripherals (LED or buzzer). This API document will discuss in detail how the PC/SC commands were implemented for the contactless interface and device peripherals of the RCR-2672.
Features
• USB 2.0 Full Speed Interface
• CCID Compliance
• Smart Card Reader:
• Read/Write speed of up to 424 Kbps
• Built-in antenna for contactless tag access, with card reading distance of up to 50 mm
(depending on tag type)
• Support for ISO 14443 Part 4 Type A and B cards, MIFARE, FeliCa, and all four types of NFC (ISO/IEC 18092 tags)
• Built-in anti-collision feature (only one tag is accessed at any time) o Application Programming Interface:
• Supports PC/SC
• Supports CT-API (through wrapper on top of PC/SC) o Built-in Peripherals:
• User-controllable bi-color LED
• User-controllable buzzer
• Supports AndroidTM 3.1 and above
• Compliant with the following standards:
• IEC/EN 60950 o ISO 18092
• ISO 14443
• CE
• FCC
Specification
Items | Technical Parameter |
Protocol | USB CCID PCSC |
Connector Type | Standard Type A USB |
Power Source Supply Voltage | From USB port 5 V |
Speed | Read/Write speed of up to 424kbps |
Standard | Support for ISO 14443 part 4 Type A and B cards |
Protocol Type | MIFARE,FeliCa and all four tyoes of NFC |
Supply Current | Max. 50 mA. |
PC-linked Mode | PC/SC CT-API |
Net Weight | Approx.: 0.3 Kg (without accessories) |
ROHS standard | Comply with ROHS standard. |
Temperature | 0 °C – 60 °C |
Humidity | Max. 90% (non-condensing) |
Applications
• e-Government
• e-Banking and e-Payment
• e-Healthcare
• Public Key Infrastructure
• Network Security
• Access Control
• Loyalty Program
Maintenance
There will be something dirty on IC card contact which will influence IC card reading and writing after using for a while. Therefore, we must make a certain maintenance for card reader. the specific procedure as below:
1) Using cleaning card to clean dirty things on IC contact.
2) Periodical maintenance: it needs to clean maintenance once when card in and out 20,000 times. (count once when card in and out.)
Contact maintenance: it will cause IC card and contact touch error when there is dirty things on contact. It should clean the contact pin, the main method is that we use cleaning card with alcohol to clean card reader, make auto test IC card operation.