Two Teachable Evaluation Limits 200kHz Ultrasonic Level Sensor
Brand Name:YUJIE
Certification:ISO9001
Model Number:UM1000-18GM-AU-V1
Minimum Order Quantity:1 Piece
Delivery Time:3~30 working days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Room 1807,Block A,Qunxing-Square,Huaqiang North Road,Shenzhen,Guangdong,China
Supplier`s last login times:
within 24 hours
Product Details
Company Profile
Product Details
High Accuracy Ultrasonic Sensor Level Measurement With Pipe
Stainless steel Housing
Highlights
TECH-IN
Temperature compensate
LED for status indication
Battery powered
Minmal dead bands
Applications
Liquid and Solid Level Measurement
Tanks,Totes,Processing
Bulk Material Management
Factory automation
Position Detection
Avoid collision
| Technical data | ||||||||||||
| General Specifications | ||||||||||||
| Sensing distance 100…1000mm(50…800mm) | ||||||||||||
| Adjustment range 100…1000mm(50…800mm) | ||||||||||||
| Unusable area 0…100mm(0…50mm) | ||||||||||||
| Standard target plate 100mm×100mm | ||||||||||||
| Transducer frequency About 200 kHz | ||||||||||||
| Response delay About 125ms | ||||||||||||
| Indicators/Operating means | ||||||||||||
LED yellow solid: object in evaluation range flashing: program function | ||||||||||||
| LED red flashing: fault or program function object not detected | ||||||||||||
| Electrical specifications | ||||||||||||
| Operating voltage UB 10…30VDC,ripple10%ss | ||||||||||||
| No-load supply current ≤20mA | ||||||||||||
| Output | ||||||||||||
| Output type 1 analogue output 0…10V | ||||||||||||
| Resolution 0.11mm at max.sensing range | ||||||||||||
Deviation of the characteristic curve ±1% of full-scale value | ||||||||||||
| Repeat accuracy ±0.1% of full-scale value | ||||||||||||
| Load impedance >1k Ohm | ||||||||||||
| Temperature influence ±1.5% of full-scale value | ||||||||||||
| Ambient conditions | ||||||||||||
| Ambient temperature -25…70℃ | ||||||||||||
| Storage temperature -40…85℃ | ||||||||||||
| Mechanical specifications | ||||||||||||
| Protection grade IP67 | ||||||||||||
| Connection Connector M12x1,4-PIN | 1 BN=BROWN 2 WH=WHITE 3 BU=BLUE 4 BK=BLACK V1 Connector | |||||||||||
Material Housing brass,nickel-plated | ||||||||||||
Transducer epoxy resin/hollow glass sphere mixture; Polyurethane foam | ||||||||||||
Weight 60g | ||||||||||||
Adjusting the evaluation limits The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -UB, A2 with +UB. Two different output functions can be set: 1. Analogue value increases with rising distance to object (rising ramp) 2. Analogue value falls with rising distance to object (falling ramp) Evaluation limits may only be specified within the first 5 minutes after Power on. To modify the evaluation limits later, the user may specify the desired values only after a new Power On. TEACH-IN rising ramp (A2 > A1) - Position object at lower evaluation limit - TEACH-IN lower limit A1 with - UB - Position object at upper evaluation limit - TEACH-IN upper limit A2 with + UB TEACH-IN falling ramp (A1 > A2): - Position object at lower evaluation limit - TEACH-IN lower limit A2 with + UB - Position object at upper evaluation limit - TEACH-IN upper limit A1 with - UB Default setting A1: unusable area A2: nominal sensing range Mode of operation: rising ramp LED Displays
| ||||||||||||
Two Teachable Evaluation Limits 200kHz Ultrasonic Level Sensor
Inquiry Cart
0