10KV Coupling Driving ABB Exhaust Fan Centrifugal Type

Brand Name:SIMO
Certification:CE, ISO9001:2008,TUV
Model Number:SIMO Blower 5-06
Minimum Order Quantity:1 Set
Delivery Time:15-35 Days
Payment Terms:T/T, L/C, Payment Term Is Negotiable
Contact Now

Add to Cart

Verified Supplier
Location: Xinxiang Henan China
Address: No.343, SIMO Road, FengQuan District, XinXiang City, HeNan Province, China
Supplier`s last login times: within 31 hours
Product Details Company Profile
Product Details

Coupling Driving Energy Efficiency Wear Resistant Industrial Centrifugal Fans


Introduction


The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace.

This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles.

It can be used for more than four years when the concentration of impurities is less than 200 mg/m3.

If it contains a lot of impurities, it also can be used, but it will shorten the service life.

The maximum operating temperature of the induced draft fan must not exceed 250°C.

The performance of the fan is expressed by parameters such as fan flow, full pressure, spindle speed, shaft power and efficiency.


Technical data

seriesmodelRotation Speed
(r/min)
Total Pressure
(Pa)
Air Capacity
(m³/h)
Power
(kW)
5-068D145025921989120282060715
10D145040513108234934024955
11D145030362329312695357155
12.4D145038582960447927674090


Advantages and Features


1.It can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures.

2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste.

3. Motor slide guide can be provided for convenient belt tensioning to reduce energy loss caused by belt slack.

4. The bearing housing is reserved for the installation position of temperature and vibration sensors, which can facilitate the installation of fan operation monitoring device.

5. Use liquid lubricating oil. It is not necessary to open the bearing housing to replace and fill the lubricating oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of the lubricating oil.

China 10KV Coupling Driving ABB Exhaust Fan Centrifugal Type supplier

10KV Coupling Driving ABB Exhaust Fan Centrifugal Type

Inquiry Cart 0