3 Phase Reactive Co Rotating Twin Screw Extruder With Devolatilization Vents

YSE25 counter rotation extruder for reactive extrusion with devolatilization vents

YSE25 counter rotation twin screw extruder is designed for use in laboratory reactive extrusion and compounding. It's highly flexible and highly energy-saving.

It's equipped with three vacuum vents and can be usedd for This machine is mainly used for high strength fiber material exhaust extrusion.And all the electrical parts is explosion-proof.It enables seamless adjustment of processing machines for laboratory and small-scale production to all processing operations suitable for most polymers.

Technical datas

Application

1. Engineer plastics granule: ABS,PC,POM,PP, PBT,PE,PA
2. Special Engineering Plastics: PA 6T,PA9T,LCP,PPS, PEEK;
3. Rubber-plasitcs blend modification: PP,PE,PS+SBS,PA+EPDM,EVA+silicon rubber
4. Ploymer blending :PC+ABS, PA+ABS,CPE+ABS,PP+EPDM,PA+SBS,etc.
5. Masterbatch:color masterbatch, function masterbatch,white masterbatch and black masterbatch
6. Polymer compounding and modification,filler compounding and fibre reinforcement.
7. Extruder for film production line: BOPP,BOPET,BOPI,BOPA,BOPS film, battery separator film, seawater desalination film,etc.

Our advantages

1. High output

The output is 1-2 times larger than the same size extruder from other lower torque twin screw extruders.

The biggest extruder can output up to 12T/h per set.

2. Energy-saving

For the same output , our small size extruder can replace the big size of other extruder, such as our HPL51 has more output than other 65 extruder , smaller extruder, less energy consumption,less material consumption, smaller production areas.

And we use heat rod instead of cast copper heater, which can save 15%-20% energy.

3. Advanced design

High torque: carrying capacity factor of gearbox up to 15Nm/cm3;

High speed: max. 1800rpm/m；

4. Long service life

bearings on output shaft 2 without load, which greatly extended the service life of the bearings on the weak axis , gearbox life can reach 72000 hours (10 years)；

5. Custom made design

Wide D/d choice:1.33～2.0;

Custom made clearance: minimum clearance can be 0.15mm；

About us

We are dedicate to develop, design, and manufacture co-rotation, counter-rotation parallel twin-screw extruder production line.Our extruders have the advantages of “high torque, high efficiency, low energy-consumption, high price/performance ratio, long service life ” (designed service life of gearbox as long as 72000 hrs). We keep the same step with the most advanced extruder manufaturers in the world.

We can supply :Twin screw extruder production line;

High torque gearbox;Automatic long fiber reinforced thermoplastic composites (LFT - D) production line;Counter-rotation parallel twin screw extruder;Differential concentration mixer;

Repairing and machining large parts; Design, machine all of screw elements on Japan and Germany extruders.

Parts and advantages

Sichuan Advance technology Co.,ltd(is dedicate to develop and manufacture co-rotation, counter-rotation parallel twin-screw extruder production line.We'll exhibit two types twin screw extruders, high torque(Nm/cm3>13).

We integrate and upgrade these experiences to create our own transmission concept and form our core technology “bilateral gear symmetrical driving system”. The technology enables our extruders have the advantages of “high torque, high efficiency, low energy-consumption, high price/performance ratio, long service life ” (designed service life of gearbox as long as 72000 hrs). We keep the same step with the most advanced extruder manufaturers in the world.

We can supply ：Co-rotation twin screw extruder production line;

High torque gearbox;Automatic long fiber reinforced thermoplastic composites (LFT - D) production line;Counter-rotation parallel twin screw extruder;Differential concentration mixer;

Repairing and machining large parts; Design, machine all of screw elements on Japan and Germany extruders.