HONGHUA Mud Pump Spares Suction Manifold GH3101-05.28.00 NB2200G.05.40.00

HONGHUA Mud Pump Suction Manifold, GH3101-05.28.00 NB2200G.05.40.00 NB800M.05.29.00 GH3161-05.25.00

The fluid end mainly consists of cylinder block, liner, piston, valve, suction manifold, discharge manifold, discharge pulsation dampener, relief valve and spraying device etc.

The discharge manifold is connected with 3 cylinder blocks simultaneously too. It has two ports at left and right side. The drilling fluid can be discharged from left side or right side.

The discharge filter shall be installed at the other side of discharge manifold. The discharging mud go to the drilling fluid line (manifold) after filtering.

Before the mud discharge manifold needs to be repaired, the bypass valve on pressure release line should be opened first, and let the pressure in discharge manifold to be released to zero.

Then install suction manifold and discharge manifold. After adjusting and aligning each part well, use a torque wrench to tighten the connection bolts between suction manifold, discharge manifold and cylinder blocks respectively to specified torque.

How to Install the discharge manifold and accessory manifold?

(1) Wash the contacting face between discharge manifold and cylinder blocks well, install the seal ring and put it onto cylinder blocks. The tightening torque of bolt M39×3 is 1954～2255N.m.

(2)As per discharge manifold requirement, install the accessory manifold (5-way or 4-way), discharge pulsation dampener, relief valve, bypass valve, and pressure release line etc. The tightening torques of bolts and nuts are required to meet clause 12.2.1.

The suction manifold is connected to 3 cylinder blocks simultaneously. It has three ports at left , middle and right. The drilling fluid can be sucked in from left, right or middle port according to your desire.

How to Install the suction manifold and suction desurger

(1) Install the suction manifold: clean the flange end face of suction manifold,install seal rings and connect it to three cylinder block. The tightening torque of bolt M39×3 is 321～370N.m

(2) Install suction the suction desurger:install the suction desurger onto the suction manifold.

Mud Pump Parts Model We Can Do

FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.

2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the most usual ways we are using.

3) What's the order procedure?
A: First we discuss order details, production details. Then we issue you an PI for your confirmation. You will be requested to do pr-e paid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

4) How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

More customer view:45-emscof800.htm-yindapump.com.pdf

Sanyuan Yinda Petroleum Machinery Co.,Ltd since 2002, is a professional manufacturer of mud pump parts, integrating research, manufacturing and trade together.

The main products of our company are ceramic cylinder liner, bi-metal mud pump cylinder liner, valve assembly, piston assembly, hydraulic cylinder, rod and other mud pump parts. Our company can also manufacture various special andnonstandard.

Yinda has a professional team and advanced mechanical equipment. With these super strength of our company, and the feedbacks of customers, We constantly improves the technology and quality of our products.

Our company carried out the API7K standard strictly to manufacture, testing and managing and ourcompany has passed the API7K certification of American Petroleum Institute.
Yinda Petroleum Machinery Co., Ltd., focuses on mud pump parts for 18 years, with thequality policy “quality first, customer satisfied, development consolidated, continuous improvement”, the company development goals “become the world-classsupplier of mud pump parts”, and service philosophy “beginning with customerneeds, end to customer satisfaction, exceed customer expectations”.

Wesincerely wish to have win-win cooperation with domestic and foreigncolleagues, to work together and do our best to provide customers with qualityproducts and services.

We warmly welcome customers to contact us. Looking forward to working with you!