Add to Cart
Astm Aisi 409l 410 420 430 440c Stainless Steel Plate / Sheet / Coil / Strip
Product Information
Certificate | SGS,ISO |
Surface | 2B,BA(bright annealed) NO.1 NO.2 NO.3 NO.4,8K HL(Hair Line) PVC |
Thickness | 0.15-6mm |
Width | 24-2000mm |
Length | 1-6m or as required |
Delivery time | 15-20 days after the deposit or LC. |
Feature | Good cost performance,price stability |
Good shaping capability,weld bending capability,high thermal
conductivity,low thermal expansion | |
Shipment | Within 10-15 workdays,25-30days when the quality beyond 1000tons |
Stainless steels are a family of iron based alloys that contain a
minimum of 10.5% chromium (CR). The presence of chromium creates an
invisible surface film that resists oxidation and makes the
material passive or corrosion resistant (stainless). There are
multiple families of stainless steel which are designed for various
applications and uses. Stainless grades can be further modified to
meet various processing, corrosion, temperature and strength
conditions.
Stainless steel sheet/Plate can be made by cold rolling and hot
rolling, including the thickness of 0.31-6.0 mm sheet and 3.0-60 mm
plate; common type 201, 202, 304, 304L, 316L, 309S, 310S, 317L,
347, 409L, 410S, 420J1/J2, 430, 446 etc.
Hot-rolled stainless steel, mechanical properties not as good as
cold-rolled, but there are good toughness and ductility.
Cold-rolled stainless steel plate due to the good hardening,
toughness is low.
In order to ensure all kinds of stainless steel yield strength,
tensile strength, elongation and hardness and other mechanical
properties to meet the requirements, prior to delivery must be
stainless steel annealing, solution treatment, aging heat
treatment.
Although Alloy 409 is designed principally for the automotive exhaust industry, it has been successfully used in other industrial applications as well. Some examples of applications that call for Alloy 409 include:
C | Mn | Si | P | S | Cr | Ni | Ti | |
---|---|---|---|---|---|---|---|---|
409 | max:0.08 | max:1.0 | max:1.0 | max:0.045 | max: 0.045 | min: 10.5 max: 11.75 | max: 0.5 | min: 0.48 max: 0.75 |
Grade | Tensile Strength MPa (min) | Yield Strength 0.2% MPa(min) | Elongation % | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
---|---|---|---|---|---|
409 | 380 | 207 | 20 | 207 | 95 |