700-1000 Mpa Tensile Strength WNiFe Alloy Plates As Medical Linear Accelerator
Brand Name:Sanhui
Certification:ISO9001
Model Number:Customized
Minimum Order Quantity:10 Kilograms
Delivery Time:20 days after order
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Zhengzhou Henan China
Address:
Rm.2009,20th Floor,Unit C,Yuhong Plaza,No. 61 Zijingshan Road，Zhengzhou,China
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
700-1000 Mpa Tensile Strength WNiFe Alloy Plates Applied as Medical Linear Accelerator
Tungsten Nickel Iron Alloy Description
Tungsten nickel iron alloy is an alloy composed of tungsten as the matrix and a small amount of nickel, iron and other alloy elements. It has the characteristics of high density (18.8g / cm3) and adjustable, strong ability to absorb high-energy rays (1 / 3 higher than the ray absorption coefficient of lead), low coefficient of thermal expansion, good plasticity, high strength and elastic modulus, good machinability and weldability. So WNiFe alloy is widely used in radiation protection and guidance, industrial counterweight parts, safety and defense parts, etc
Tungsten Nickel Iron Alloy Properties
1. High strength: tensile strength is 700-1000mpa;
2. Strong ray shielding ability: under the condition of the same
thickness, the ray shielding ability of tungsten alloy is more than
1.7 times that of lead. When the ray is stronger, the difference
between the two is more obvious;
3. High thermal conductivity: the thermal conductivity of tungsten
alloy is 5 times that of die steel;
4. Small coefficient of thermal expansion
5. Good shaping, processability and weldability;
6. Compared with the toxicity of lead, tungsten alloy material has
environmental protection characteristics, and the manufacturing of
radiation detector with tungsten alloy shield is not harmful to
human safety;
7. Compared with W-Ni-Cu alloy, W-Ni-Fe alloy has certain
ferromagnetism, and its mechanical properties and processing
properties are better than that of W-Ni-Cu alloy.
| Composition | 90%W | 93%W | 95%W | 97%W | |||||
| State | Sinter | Vacuum | Forge | Sinter | Vacuum | Forge | Sinter | Vacuum | Sinter/Vacuum |
| Density(g/cc) | 16.85~17.25 | 17.15~17.85 | 17.75~18.35 | 18.25~18.25 | |||||
| Hardness(HRC) | 32Max | 30Max | 40Min | 33Max | 31Max | 40Min | 34Max | 32Max | 700Min/850Min |
| Tensile Strength (Mpa) | 770Min | 900Min | 1400Max | 770Min | 910Min | 1440Max | 735Min | 920Min | 35Max/33Max |
| Yield Strength | 620Min | 620Min | 1280Max | 650Min | 650Min | 1340Max | 650Min | 650Min | ~ |
| Elongation(%) | 5Min | 15Min | 5Min | 12Min | 3Min | 3Min | 3Min | 12Min | 2Min / 6 Min |
Introduction:
The density of tungsten heavy alloy is very high. Its density is twice of steel. Tungsten heavy alloy has low thermal coefficient but it has high absorption ability and high-energy rays. The tungsten heavy alloy we make conforms to ASTM B777-99 standard.
It is massively applied to balancing weight mould and high temperature moulds. Also they can be made into protective shield and high-energy rays. The tungsten heavy alloy conforms to ASTM B 777-99 standard.
700-1000 Mpa Tensile Strength WNiFe Alloy Plates As Medical Linear Accelerator
Inquiry Cart
0