CE Hydraulic 3 Roller Plate Bending Machine For Metallurgy Industry

Ⅳ.Operating rules of Hydraulic Three-Roll Symmetrical Plate Rolling Machine of Metallurgy Machine

Operation and use of the winding machine staff should understand the structure of the machine, and have some electrical common sense, switch on the main power supply (leakage circuit breaker is required) no-load operation (winter oil pump motor idling 10-20min before normal work). And check whether the components on the equipment operate normally. Check whether the anchor bolt is firm, check whether the screw bolt is loose, if the rolled plate is gas cutting material, should first remove the gas cutting metal slag, solder joints and accessories, to ensure the normal service life of the roll.

(1) Check before operation

1. Check each lubrication point interface.

2. Start the hydraulic motor, check whether the pressure is normal, pay attention to whether the rotation direction of the motor is correct, whether the voltage is normal, operate the manual valve handle, lift the upper roll (pay attention to the upper position of the lead screw fulcrum), make the upper roll and the lower roll parallel, the error is not greater than 0.3-2mm..

(2) Operation process

1. Send the plate between the upper and lower rollers.

2. Adjust the plate so that the edge of the plate is parallel to the lower roller. According to the accuracy requirements, the error should not exceed 1-2mm.

3. Roll the template, operate the manual valve handle, press down with the upper roll, and observe the pressure in the process of rolling.

4. Start the main motor, start winding, working on both sides of the winding machine shall not be anyone, in order to prevent the winding workpiece out of the accident, so that the motor anyway turn, after several times of pressure anyway turn, complete the winding.

5. Material removal: turn off the main motor, start the hydraulic circuit, make the upper roll rise to the removal position, press the manual valve handle, pull down the live support, fine tune the press bar downward, take out the winding workpiece, and then restore to the original position.

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.