HGM Series Ore Grinding Mill Micro Powder Production Systems 300-12000 Kg/H

Ore Grinding Mill Of HGM Series Micro Powder Production System

1. Performance characteristics of Ore Grinding Mill Of HGM Series Micro Powder Production System

(1) The micro grinding is efficient and low consumption. Under the same material, power and fineness of finished product, the output is 40% higher than that of air mill and agitation mill.

(2) The micro mill has a long service life. In the case of the same fineness of materials and finished products, the service life of wear parts is longer than that of impact crusher and turbine crusher, generally up to more than 1 year.

(3) There is no rolling bearing or screw in the grinding cavity. There is no bearing and its seals and fragile screws easily loose and destroy the machine and other problems

(4) The fineness of the ultrafine grinding product can reach D97 ≤5μm at one time

2. Product parameters of Ore Grinding Mill Of HGM Series Micro Powder Production System

3. Working principle of Ore Grinding Mill Of HGM Series Micro Powder Production System

(1)The motor of the micro grinding machine drives the spindle and the turntable of each layer to rotate through the reducer, and the turntable drives dozens of ring rollers to roll and rotate freely in the raceway of the grinding ring through the pin.

(2)Large pieces of material by the hammer crusher broken into small particles into the storage bin by elevator, electromagnetic vibrating feeder will material evenly to the centre of the wheel, on the material under the action of centrifugal force to circle around, and fall into the inside of the ring raceway is stamping ring rolling, roll grinding, grinding and crushing, the material after the first layer crushing and fall into the second and third layer, Small particles of material after thousands of times of impact, rolling and rubbing into ultrafine powder, in the high pressure centrifugal fan suction action will be external air inhalation machine, and the third layer of pulverized coarse powder into the powder separator.

(3)The eddy current generated by the rotating turbine in the powder separator makes the coarse granular materials fall back and reground. The fine powder enters the cyclone powder collector with the airflow and is discharged from the discharge valve at the bottom of the cyclone powder collector, which is the finished product. The airflow with a small amount of fine dust is purified by the pulse dust collector and discharged through the fan and muffler.

Ore Grinding Mill Of HGM Series Micro Powder Production System

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.