100kN 5m/S Mine Hoist systems With Hydraulic Station Disc Brake
Brand Name:ZTIC
Certification:ISO
Minimum Order Quantity:>=1 Pieces
Place of Origin:China
Price:$100.00
Supply Ability:100.0 Piece/Pieces per Week
Contact Now
Add to Cart
Verified Supplier
Location:
Luoyang Henan China
Address:
No.2-A-609, NO.1 Longyu Road, Jianxi District, Luoyang, Henan, China
Supplier`s last login times:
within 13 hours
Product Details
Company Profile
Product Details
Mine Hoist With Hydraulic Station Disc Brake
Product Description
Disc brake, as the name implies is named after its shape.It is
controlled by hydraulic pressure, the
main components are brake disc, pump, brake clamp, oil pipe and so
on.The brake disc is made of alloy steel and fixed to the
wheel, which rotates with the wheel.Disc brakes have been widely
used in cars, most cars are now used for all the wheels, a few
cars only as a front wheel brake, with the rear wheel drum brakes,
so that the car has a higher braking direction stability.
Another ventilated brake disc, from the appearance, you will find
that there are many from the center of the brake disc to the
edge of the hole, these holes are made by a special process, they
can through the centrifugal force generated in the vehicle
driving air convection, for the brake disc cooling, played a role
in preventing the thermal attenuation of the brake.
Working Principle
When braking, the oil is pressed into the inner and outer cylinder,
the piston in the hydraulic action of the two brake block
pressure brake disc, friction torque and braking.At this point, the
edge of the rectangular rubber seal ring in the wheel cylinder
groove produces a small amount of elastic deformation under the
action of piston friction.When the brake is relaxed, the piston
and brake block depend on the elastic of the seal ring and the
elastic return of the spring.Since the edge deformation of the
rectangular seal ring is very small, when not braking, the
clearance between the friction disc and the disc is only about
0.1mm,
which is enough to ensure the release of the brake.And because the
brake disc by thermal expansion, the thickness of only trace
changes, it will not occur "supporting hysteresis" phenomenon.In
addition to sealing, the rectangular rubber sealing ring also
plays the role of piston return and automatic clearance
adjustment.If the friction disc of the brake block and disc
clearance wear
increases, when the brake ring deformation reached the limit, the
piston can continue to move, until the friction disc compression
brake disc.After the brake is released, the rectangular rubber seal
pushes the piston back the same distance as before the wear,
still maintaining the standard value.
Tower multi rope friction mine hoist
| Model | Wheel diameter | Wire Rope | Max ascension speed | Reducer | Size (L×W×H) | |
| maximum static tension | ||||||
| m | kN | m/s | Model | Speed ratio | m | |
| JKM-1.3×4(Ⅰ)E | 100 | 5 | XP550 | 11.5 | 6.4×6.5×1.6 | |
| JKM-1.6×4(Ⅰ)E | 150 | 8 | XP560 | 7.35 10.5 11.5 | 6.4×7×1.75 | |
| JKM-1.85×4(Ⅰ)E | 210 | 10 | XP800 | 7×7.5×2.02 | ||
| JKM-2×4(Ⅰ)E | 2 | 230 180 | 10 | XP800 | 7×8×2.2 | |
| JKM-2.25×4(Ⅰ)E | 2 | 215 | 10 | XP800 | 7.4×8×2.3 | |
| JKM-2.8×4(Ⅰ)E | 2.5 | 335 | 14 | XP1000 | 8.5×10×2.65 | |
| JKM-2.8×4(Ⅱ)E | P2H630 | 7.5×8.5×2.65 | ||||
| JKM-2.8×6(Ⅰ)E | 2.5 | 500 | 14 | XP1120 | 8×8.5×2.68 | |
| JKM-2.8×6(Ⅱ)E | P2H800 | 7.5×8.5×2.68 | ||||
| JKM-2.8×6(Ⅲ)E | 7.5×8×2.7 | |||||
| JKM-3.25×4(Ⅰ)E | 3 | 450 | 14 | XP1120 | 7.35 10.5 11.5 | 8.9×8.9×2.98 |
| JKM-3.25×4(Ⅱ)E | P2H800 | 8.5×8.7×2.98 | ||||
| JKM-3.5×6(Ⅰ)E | 3 | 790 | 14 | XP1250 | 11.5×9.2×3.15 | |
| JKM-3.5×6(Ⅱ)E | P2H900 | 10.5×9.2×3.15 | ||||
| JKM-3.5×6(Ⅲ)E | 8×9×3.2 | |||||
| JKM-4×4(Ⅰ)E | 3.2 | 690 | 14 | XP1250 | 7.35 10.5 11.5 | 9×10×3.63 |
| JKM-4×4(Ⅱ)E | P2H900 | 9×10×3.63 | ||||
| JKM-4×4(Ⅲ)E | 7.5×9×3.63 | |||||
| JKM-4×6(Ⅲ)E | 3.2 | 1030 | 9×9×3.63 | |||
| JKM-4.5×6(Ⅲ)E | 3.6 | 1330 | 16 | 12×9.5×3.9 | ||
| JKM-5×6(Ⅲ)E | 4 | 1600 | ||||
Floor type multi rope friction mine hoist
| Model | Wheel diameter | Wire Rope | Max ascension speed | Reduces | Size (L×W×H) | ||
| maximum static tension | Max
| ||||||
| m | kN | mm | m/s | Model | Ratio | m | |
| JKMD-2.25×2(Ⅰ)E | 2.25 | 105 | 22 | 10 | ZZP560(2) | 11.5 | 7.7×9×2.1 |
| JKMD-2.25×4(Ⅰ)E | 215 | XP800(2) | 7.35 10.5 11.5 | 6.8×9.5×2.3 | |||
| JKMD-2.8×2(Ⅱ)E | 2.8 | 165 | 28 | XP800(2) | 7.8×10×2.65 | ||
| JKMD-2.8×4(Ⅰ)E | 335 | XP1000(2) | 8.5×10×2.65 | ||||
| JKMD-2.8×4(Ⅱ)E | P2H800(2) | 7.5×10×2.65 | |||||
| JKMD-3.5×2(Ⅰ)E | 3.5 | 265 | 35 | XP1000(2) | 7×9.5×3.02 | ||
| JKMD-3.5×4(Ⅰ)E | 525 | 13 | XP1120(2) | 8.5×9.5×3 | |||
| JKMD-3.5×4(Ⅱ)E | P2H800(2) | 8×9.5×3.02 | |||||
| JKMD-3.5×4(Ⅲ)E | 7.5×9.5×3.0 | ||||||
| JKMD-4×2(Ⅰ)E | 4 | 340 | 39.5 | 12 | XP1120(2) | 7.35 10.5 11.5 | 8.2×10×3.4 |
| JKMD-4×2(Ⅱ)E | P2800(2) | 7.8×10×3.4 | |||||
| JKMD-4×4(Ⅰ)E | 680 | 14 | XP1250(2) | 11×10×3.4 | |||
| JKMD-4×4(Ⅱ)E | P2H900(2) | 10.5×10×3.4 | |||||
| JKMD-4×4(Ⅲ)E | 8.1×8.7×3.4 | ||||||
| JKMD-4.5×4(Ⅲ)E | 4.5 | 900 | 45 | 9.5×9.5×3.7 | |||
| JKMD-5×4(Ⅲ)E | 5 | 1070 | 50 | 9.5×10×4 | |||
| JKMD-5.5×4(Ⅲ)E | 5.5 | 1300 | 55 | 11×10.5×4.5 | |||
| JKMD-5.7×4(Ⅲ)E | 5.7 | 1500 | 57 | ||||
| JKMD-6×4(Ⅲ)E | 6 | 1570 | 57 | 11×10.5×4.5 | |||
Single-Sope Winding Mining Hoist
| Model | Drum | Tension PF | Tension Differe (KN | Rope Diameter (mm) | Capatiy(m) | Max Speed | Reduce speed ratio | Motor Speed | ||||
n u m b e r | Dia | Widlth | One-laye | Two-laye | Three-laye | |||||||
| m | kN | mm | m | m/s | r/min | |||||||
| JK-2×1.5/20 | 1 | 2.0 | 1.5 | 62 | 24 | 305 | 650 | 1025 | 5.2 | 20.0 | 1000 | |
| JK-2×1.5/31.5 | 31.5 | |||||||||||
| JK-2×1.8/20 | 1.80 | 375 | 797 | 1246 | 20.0 | |||||||
| JK-2×1.8/31.5 | 31.5 | |||||||||||
| JK-2.5×2/20 | 2.5 | 2.00 | 83 | 28 | 448 | 945 | 1475 | 5.0 | 20.0 | 750 | ||
| JK-2.5×2/31.5 | 31.5 | |||||||||||
| JK-2.5×2.3/20 | 2.30 | 525 | 1100 | 1712 | 20.0 | |||||||
| JK-2.5×2.3/31.5 | 31.5 | |||||||||||
| JK-3×2.2/20 | 3.0 | 2.20 | 135 | 36 | 458 | 966 | 1513 | 6.0 | 20.0 | |||
| 2JK-2×1/11.2 | 2 | 2.0 | 1.00 | 62 | 40 | 24 | 182 | 406 | 652 | 7.0 | 11.2 | |
| 2JK-2×1/20 | 20.0 | |||||||||||
| 2JK-2×1/31.5 | 31.5 | |||||||||||
| 2JK-2×1.25/11.2 | 1.25 | 242 | 528 | 838 | 11.2 | |||||||
| 2JK-2×1.25/20 | 20.0 | |||||||||||
| 2JK-2×1.25/31.5 | 31.5 | |||||||||||
| 2JK-2.5×1.2/11.2 | 2.5 | 1.20 | 83 | 65 | 28 | 843 | 8.8 | 11.2 | ||||
| 2JK-2.5×1.2/20 | 20.0 | |||||||||||
| 2JK-2.5×1.2/31.5 | 31.5 | |||||||||||
| 2JK-2.5×1.5/11.2 | 2.5 | 1.50 | 83 | 65 | 28 | 319 | 685 | 1080 | 8.8 | 11.2 | ||
| 2JK-2.5×1.5/20 | 20.0 | |||||||||||
| 2JK-2.5×1.5/31.5 | 31.5 | |||||||||||
| 2JK-3×1.5/11.2 | 3.0 | 135 | 90 | 36 | 289 | 624 | 994 | 10.5 | 11.2 | |||
| 2JK-3×1.5/20 | 20.0 | |||||||||||
| 2JK-3×1.5/31.5 | 31.5 | |||||||||||
| 2JK-3×1.8/11.2 | 1.80 | 362 | 770 | 1217 | 11.2 | |||||||
| 2JK-3×1.8/20 | 20.0 | |||||||||||
| 2JK-3×1.8/31.5 | 31.5 | |||||||||||
| 2JK-3.5×1.7/11.2 | 3.5 | 1.70 | 170 | 115 | 40 | 349 | 746 | - | 12.6 | 11.2 | ||
| 2JK-3.5×1.7/20 | 20.0 | |||||||||||
| 2JK-3.5×2.1/11.2 | 2.10 | 450 | 950 | - | 11.2 | |||||||
| 2JK-3.5×2.1/11.2 | 20.0 | |||||||||||
| 2JK-4×2.1/10 | 4.0 | 245 | 160 | 48 | 421 | 891 | - | 12.6 | 10.0 | 600 | ||
| 2JK-4×2.1/11.2 | 11.2 | |||||||||||
| 2JK-4×2.1/20 | 20.0 | |||||||||||
| 2JK-5×2.3/10 | 5.0 | 2.30 | 280 | 180 | 52 | 533 | - | - | 12 | 10.0 | 500 | |
| 2JK-5×2.3/11.2 | 11.2 | |||||||||||
100kN 5m/S Mine Hoist systems With Hydraulic Station Disc Brake
Inquiry Cart
0