Aluminium Stearate Spin Flash Vaporization Dryer
Brand Name:Guojin
Certification:CE
Model Number:SFD-10
Minimum Order Quantity:1 set
Delivery Time:20-30days
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou Jiangsu China
Address:
No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
Aluminium Stearate Spin Flash Vaporization Dryer
Hot air in tangential direction enters into the bottom of the
rotary flash dryer, and forms strong rotational wind field under
the action of stirrer. The materials get into the drying equipment
from screw feeder, under the strong effect of the high-speed
rotating impeller, the materials are dispersed after being rubbed
and sheared. Bulk materials are quickly crushed and fully contacted
with the hot air in order to complete drying. Dehydrated dry
materials rise with the hot air, the grading ring will retain the
large particles and the small ones will be excluded from the
rotating flash drying machine through the ring center. The cyclone
separator and dust remover will recover these materials. The wet or
bulk materials will be threw to the container wall by centrifugal
force, and fall into the bottom of the flash dryer to be crushed
and dried again.
SFD Aluminum Stearate Dryer Features
1. Adopt 2 lines tangential air enter into volute at the best position,it will improve or remove blind Angle of wind and also the wind in the weak.
2. Be good at control the powder’s moisture,fineness,and hold time.for control the speed coordinating and unifying at spinning disk work with wind-enter ,it can ensure the outlet wind with low temperature,it will also reduce the energy consumption.
3. The special alloy steel be used in the rotary blade,the layout structure with unique,it have the character of small erosion,contact surface wide,cutting force strong.
4. Adopt the newly leak-proof structure,the main engine bearing life will be delay,and the bearing black with the cooling device.
5. In order to ensure the powder water content less than 0.5%,so increase the height than the original basis ,it also equip with spinning disk,it will make the powder quality and particle size meet with your requirement.
Due to the gas-solid corresponding relative velocity big,even
though the mix temperature around 80~90℃,the powder temperature
still on below 45℃ condition,it will help to packing and save
energy.
SFD Aluminum Stearate Dryer Application
SFD rotating flash drying machine is applicable to dry viscous,
thixotropic, thermosensitive powdery and granular materials in the
dyes, pigment, chemical, ceramics, food and pharmaceutical
industry. The appropriate materials can be dried by this drying
equipment include:
1. Inorganic materials: boric acid, calcium carbonate, hydroxide, copper sulfate, ferric oxide, barium carbonate, antimony trioxide, metal hydroxide, heavy metallic salt and compound cryolite.
2. Organic materials: atrazine, lauric acid, benzoic acid, sodium oxalate, cellulose acetate
3. Ceramics: kaolin, silica and calay
4. Dyes: anthraquinone, black iron oxide, butyrate, titanium hydroxide, zinc sulfide, azo dyes
5. Food: soy protein, gelatinized starch, vinasse, triticin, wheat starch
6. Pharmaceuticals: analgin (The first domestic application of flash dryer)
1. Inorganic materials: boric acid, calcium carbonate, hydroxide, copper sulfate, ferric oxide, barium carbonate, antimony trioxide, metal hydroxide, heavy metallic salt and compound cryolite.
2. Organic materials: atrazine, lauric acid, benzoic acid, sodium oxalate, cellulose acetate
3. Ceramics: kaolin, silica and calay
4. Dyes: anthraquinone, black iron oxide, butyrate, titanium hydroxide, zinc sulfide, azo dyes
5. Food: soy protein, gelatinized starch, vinasse, triticin, wheat starch
6. Pharmaceuticals: analgin (The first domestic application of flash dryer)
SFD Aluminum Stearate Dryer Technical Parameters
| Type | Barrel diameter(mm) | Main machine dimensions(mm) | Main machine power(kw) | Treatment wind capacity(m3/h) | Water evaporatoion(kgg/h) |
| SFD-2 | 200 | 250x2800 | 5-9 | 300-800 | 10-20 |
| SFD-3 | 300 | 4400x3300 | 8-15 | 600-1500 | 20-50 |
| SFD-4 | 400 | 500x3500 | 10-17.5 | 1250-2500 | 25-70 |
| SFD-5 | 500 | 600x4000 | 12-24 | 1500-4000 | 30-100 |
| SFD-6 | 600 | 700x4200 | 20-29-2500 | 5000 | 40-200 |
| SFD-8 | 800 | 900xx4600 | 24-35 | 3000-8000 | 60-600 |
| SFD-10 | 1000 | 1100x5000 | 40-62 | 5000-12500 | 100-1000 |
| SFD-12 | 1200 | 1300x5200 | 50-89 | 10000-20000 | 150-1300 |
| SFD-14 | 1400 | 1500x5400 | 60-105 | 14000-27000 | 200-1600 |
| SFD-16 | 1600 | 1700x6000 | 70-135 | 18700-36000 | 250-2000 |
SFD Aluminum Stearate Dryer Flowchart
SFD Aluminum Stearate Dryer Show
Contact Me
Aluminium Stearate Spin Flash Vaporization Dryer
Inquiry Cart
0