1300Kg Touch Screen Antiviral Face Mask Making Machine
Brand Name:Sunye
Certification:CE
Model Number:ZPFM95
Minimum Order Quantity:1
Delivery Time:10-15 working days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
17-1 RONGTONG Road, Xishan District, Wuxi City, Jiangsu Province
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Touch Screen Fully Automatic Foldable Mask Making Machine
Face masks machine: production machinery, we are on the market face
mask machine are: flat face mask machine , cup type mask duck mouth
mask machine fold masks gauze mask machine such as planar masks
machine series according to different ears with welding way and
method of use can be divided into: the inner face mask machine,
face mask machine, outer ear bind type mask machine, the production
of these three kinds of planar masks need face mask machine body,
it is an integral part of the flat masks.
| Parameters | |
| Type | ZPFM95 |
| Size | (9M*1.4M*2M)(L*B*H) |
| Production Capacity | 30~45 Pcs/min |
| Failure rate | 10 min≤8h |
| Power | 380V±10% 50Hz |
| Air supply | 0.6Mpa-0.8Mpa |
| Qualification rate | 98-99% |
| Ultrasonic Frequency | 20KHz |
| Product Size Error | ±1mm |
| Core Components | PLC, Motor |
| Equipment utilization rate | ≥98% |
| Weight | 1300Kg |
| Working conditions | |
| Ambient temperature | 5 ℃ ~ 35 ℃ |
| Altitude | ＜ 2000m |
| Relative humidity | ＜ 85% (no condensation) |
| Installation site | indoor flat ground |
| Air source | 0.45mpa-0.65mpa |
1. High stability, low failure rate, beautiful appearance without rust.
2. Computer PLC programming control, servo drive, high degree of automation.
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
4. The automatic mask making machine is automatic from material
feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting,
and material discharging.
6. The ultrasonic technique does no harm to the characteristic of
the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and
practicality.
8. Faster, Rotary connection device of Independent innovation
design.
9. More stable, upgraded machine, touch screen, Taiwan
photoelectric detection, stable performance, and low failure rate.
Emergency stop
The machine stops immediately after an emergency stop or abnormal operation. After restart, the cutter wheel, rotating nose line feeding disc and ear belt rotating disc can be operated again after they return to the original position. If the original point cannot be restored after power transmission again, the elimination method is to turn off the power supply and remove the air pressure source, then adjust each rotating disk, pull the rotating disk to the correct position by hand, then connect the air pressure source, and then restart the power supply to restore normal operation.
Common faults and Solutions
| Item | Parts Assy | Problem and fault | Solutions |
| 1 | Fabric unwinding device | The discharge shaft makes a buzzing sound and keeps turning | Check whether the displacement sensor steel sheet behind the swing bar is loose, lift the front swing bar, adjust the steel sheet to the sensor sensing position and lock the screw; check whether the cloth is loose and whether the motor is idling, move the cloth position to the position in the butt welding wheel,
and lock |
| 2 | Fabric unwinding device | Too much or too little cloth tension | The tension of the cloth is equal to the weight of the swing bar.
Move the tension spring on the counterweight bar to a distance, so
that the tension of the tension spring becomes larger and the
gravity of the swing bar becomes smaller, so the tension is
smaller. The relative position tension can be adjusted by adjusting
the angle of the sensing metal sheet of the displacement sensor. |
| 3 | Fabric unwinding device | Adjustment of cloth position | First adjust the position of the positioning horn with the welding
wheel as the center, and then adjust the cloth on the discharge
shaft with the positioning horn as the center. The cloth should be smooth through the positioning horn. |
| 4 | Nose Wire Installation device | Length adjustment of nose line | Loosen the screw on the fixed block of the feeding cylinder to move
for a certain distance, then loosen the fastening nut at the end of
the feeding cylinder, turn the adjusting nut to adjust. The
adjusted distance should be the same as the moving distance of the
fixed clamp of the feeding cylinder. The adjusted distance is the
extended distance of the nose line; After the distance adjustment, the fixed screw under the nose line cutter should be loosened to move the nose line cutter so that the center of the cut nose line is in the center of the rotating finger clamp; if the center of the nose line is not in the middle of the rotating finger clamp, the fused nose line will shift on both sides in turn. |
| 5 | Nose Wire Installation device | Can't cut off the nose line | The main problem with rhinotomy is 1. Is the air pressure sufficient, 2. Whether the cutting edge is damaged 3. Whether the installation position of cutter is correct. |
| 6 | Nose Wire Installation device | Specification of replacement nose line | To change the specification of the nose line, it is necessary to
change the fixing clip, feeding clip and finger clip, so that the width of the clip is the same as that of the nose line. |
| 7 | Nose Wire Installation device | Rotary clamp position adjustment | Adjust the rotation angle of the rotating clamp. First, turn the
rotating clamp to the nose line position, and then release the
upper sensing disc to align the gap position of the disc with the sensor and fix it. |
| 8 | Fusing device | Position adjustment of welding wheel relative to nose line | First adjust the position of the adjusting wheel to the center, and
then check whether the position of the cloth fusion and the nose
line is correct. If the position difference is too much, it is
necessary to lift the welding wheel to make the gear on the welding
wheel separate from the height of the main driving wheel gear
below. Turn the welding wheel to check the welding position; if the
position is still a little poor, turn the handwheel of the regulating wheel to adjust to the exact position. |
| 9 | Fusing device | Insufficient fusing fastness | Adjust the two limit screws to the same height so that the welding
wheel is completely pressed on the ultrasonic mold. During the
ultrasonic pressing process, it cannot be pressed to the bottom at
one time. Try to press slowly to avoid damage to the ultrasonic
mold and the fusing wheel; Check whether the ultrasonic wave is normal. |
| 10 | Fusing device | Position adjustment of cutter wheel relative to welding wheel | 1. The cutting position and welding position are not right before
and after. If there is too much difference between the positions,
it is necessary to lift the cutter wheel to make the gear on the
cutter wheel separate from the height of the main driving gear
below. Turn the cutter wheel to check the cutting position; if the
position is a little bit worse, turn the handwheel of the adjusting
wheel to adjust to the exact position; if the cutting position is
not right, loosen the fixed screw under the cutter wheel group, and
move the position of the whole cutter wheel group. 2. When the cutter wheel is depressed, observe the pressure sensor gauge connected with the cutter wheel. The number of each row of the pressure gauge represents the pressure of the left and right ends of the cutter wheel. After being depressed, the pressure at both ends should be adjusted to a similar value. |
| 11 | Fusing device | Cutter cannot be cut off | Check whether the cloth moves to the cutter limit position; Check whether the pressure of the cutter is enough. |
| 12 | Ear loop feeding | Length adjustment of ear loop | 1. Loosen the screw of the rotating disk, move the protective disk
at both ends of the rotating disk, and loosen the screw of the
return clamp on the protective disk to move the same distance. 2. The moving distance of the two protection plates shall be the same, and the moving distance of the return clip shall be the same as that of the protection plate to avoid collision |
| 13 | Ear loop feeding | Adjustment of the fastness of the ear belt line | 1. For the first adjustment, the height of the ultrasonic mold
shall be adjusted to the same as that of the electric board. 2. Loosen the screw 3, and then adjust the screw 4 to adjust the whole ultrasonic part up and down. For the left and right adjustment, loosen the screw 5. After the left and right movement, lock the screw 6. After the ultrasonic mold is adjusted to the correct position, adjust the height of the ear belt spot welding head down, and loosen the nut 7. Turn the adjusting nut 8 of the cylinder to adjust the pressing height of the welding head, loosen the screw 9, move the position and fix the left and right positions of the welding head. Both ends of ultrasonic mold must be parallel |
| 14 | Ear loop feeding | Rotation disc angle adjustment | The angle adjustment of the rotating disk is mainly the induction
disk. First, put the angle position of the rotating disk to the
position where the ear belt line is just fused to the reference
melting point on the cloth. Loosen the screw and turn the induction
disk to adjust so that the gap position is aligned with the sensor, subject to the light of the sensor. |
| 15 | Ear loop feeding | Adjustment of opening clamp and closing clamp | The birdie clamp is mainly used to adjust the connecting shaft of
the cylinder, loosen the nut, rotate the connecting shaft up and down to adjust and fix the nut. |
| 16 | Ear loop feeding | Bird clip and its fault | The birdie clamp is mainly used to adjust the connecting shaft of
the cylinder, loosen the nut, rotate the connecting shaft up and
down to adjust and fix the nut. The most frequent failure is the bird clip wear, steel ball wear, spring steel plate fatigue, which leads to bird clip not close or no elasticity; In this case, the bird clamp and steel ball need to be replaced, and the spring steel sheet can be installed reversely. If it is seriously damaged, it needs to be replaced. |
| 17 | Ear loop feeding | Adjustment of scissors position | 1. Loosen the screws to move the scissors and fix them. 2. After the scissors are moved, it is necessary to ensure that they do not collide with the rotating plate and the spot welding head of the ear belt, and that the cutting position of the scissors is the first 10 mm of the scissors mouth. If there are too many, it will lead to problems such as uneven cutting of the ear belt, incorrect position of the welding mask, continuous cutting, etc. |
| 18 | Ear loop feeding | Adjustment of spot welding position | The front and rear position adjustment can be realized by adjusting
the rotating plate under the ear belt spot welding part. The left
and right position adjustment needs to loosen the upper fixing
screws 8 of the spot welding part and adjust the spot welding
mechanism left and right until the proper position is reached, and
then tighten the screws; If it is necessary to adjust the spot welding distance of the ear belt, the ear belt welding head shall be remade according to the required distance |
| 19 | Ear loop feeding | Specification replacement and adjustment | The position of scissors shall be readjusted when replacing
scissors. When replacing the rotating disc, the length of the ear
belt needs to be adjusted. When repairing or replacing the cutter
wheel and welding wheel, pay attention to whether the cutter
position and welding position are misplaced. Always use the same
specification when replacing parts to avoid accidents or damage to the machine. |
| 20 | Mask folding device | Triangle installation position adjustment | 1. First loosen the screw under the triangle plate, and center the
left and right positions of the triangle plate with the pulling
wheel; then loosen the triangle plate screw, adjust the angle, and
make the height of the triangle plate the same as that of the
ultrasonic welding and the cutting position of the forming cutter 2. If the position cannot be adjusted correctly, the ultrasonic welding position and the forming cutter cannot be adjusted |
| 21 | Mask folding device | Center adjustment of cloth | If the cloth is not symmetrical after the triangle plate is folded
in half, the adjusting hand wheel can be turned to make the left
and right height of the pressing roller unequal to adjust the left
and right offset of the cloth to the symmetrical position. |
| 22 | Finished welding device | Incorrect forming position of mask | Turn on the manual operation on the touch screen, press the left or right movement to adjust according to the actual offset distance until the molding position is correct |
| 23 | Finished welding device | Weak fusion | 1. First, check whether the ultrasonic wave is generated. In the
case of normal wave generation, properly adjust the spacing between
the two molds 2. Pay attention that the spacing should not be too small to avoid damaging the mold |
| 24 | Finished cutting device | Cutter position and fusion position are misplaced | When the offset is small, turn the adjusting hand wheel properly to
align the cutter position with the welding position. When the
offset is large, loosen the hand wheel on the edge of the formed
cutter wheel, turn the cutter wheel to adjust to a proper position,
and then tighten the hand wheel. Finally, adjust the sensing disk back to the original position. |
| 25 | Finished cutting device | Function and adjustment of cutter induction disk | The cutter induction disc controls the material pulling and
transportation stop, and controls the origin of the cutter wheel.
Coordinate nose line welding and ear band welding. It can be used
to adjust the position of nose line by adjusting the sensing disc |
| 26 | Discharging | The product can not be discharged in time and is stuck in the cutter wheel position | 1. First, check whether the discharge part is blocked by foreign
matters, and then check whether the tightness of the discharge belt
is appropriate and properly adjusted. Clear the blocked products at
the cutter wheel before starting again 2. Do not take it out directly by hand. Be careful not to hurt your hand with the knife wheel |
1300Kg Touch Screen Antiviral Face Mask Making Machine
Inquiry Cart
0