0.8Mpa Ear Loop Disposable Mouth Mask Making Machine
Brand Name:Sunye
Certification:CE
Model Number:ZPFM95
Minimum Order Quantity:1
Delivery Time:10-15 working days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
17-1 RONGTONG Road, Xishan District, Wuxi City, Jiangsu Province
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Non Woven Ear Loop 0.8Mpa 3 Ply Disposable Mask Machine
This equipment is a fully automatic N95 (KN95) mask production
line. It has independent intellectual property rights and is
manufactured according to CE standards. The machine has the
characteristics of stability, safety, environmental protection and
high efficiency. It is mainly exported to Europe, the United States
and other international markets.
Working conditions
Installation site: indoor flat ground;
Ambient temperature: 5 ℃ ~ 35 ℃;
Relative humidity: ＜ 85% (no condensation)
Altitude: ＜ 2000m
The working environment shall be free of combustible and corrosive gases, and
the air cleanliness shall not be less than 300000;
Power supply voltage: 380V ± 10% 50Hz
Air source: 0.45mpa-0.65mpa
Installation site: indoor flat ground;
Ambient temperature: 5 ℃ ~ 35 ℃;
Relative humidity: ＜ 85% (no condensation)
Altitude: ＜ 2000m
The working environment shall be free of combustible and corrosive gases, and
the air cleanliness shall not be less than 300000;
Power supply voltage: 380V ± 10% 50Hz
Air source: 0.45mpa-0.65mpa
| Model Number: | ZPFM95 | Machine Size: | (9M*1.4M*2M)(L*B*H) |
| Condition: | New | Packing Weight: | / |
| Automatic Grade: | Automatic | Packing Volume: | / |
| Qualification rate | 98-99% | Equipment utilization rate | ≥98% |
| Power: | 11 KW | Product Size Error | ±1mm |
| Power | 380V±10% 50Hz | Place Of Origin: | China |
| Air supply | 0.6Mpa-0.8Mpa | Packing: | Wooden case |
| Output: | 30~45 Pcs/min | After Sales services: | Engineer available |
| Control Model: | New Model | Warranty: | One Year |
Features
1. High stability, low failure rate, beautiful appearance without rust.
2. Computer PLC programming control, servo drive, high degree of automation.
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
4. The automatic mask making machine is automatic from material
feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting,
and material discharging.
6. The ultrasonic technique does no harm to the characteristic of
the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and
practicality.
8. Faster, Rotary connection device of Independent innovation
design.
9. More stable, upgraded machine, touch screen, Taiwan
photoelectric detection, stable performance, and low failure rate.
Structure introduction: The mechanical part is divided into nine structures: cloth unwinding device, nose line installation device, fuse device, ear belt feeding device, mask folding device, finished product welding device, finished product cutting device and discharging device.
- Cloth unwinding device: The cloth is pulled forward along with the material pulling wheel to lift the swing rod, and a displacement sensor is installed behind the swing rod. When the swing rod is lifted to rotate the metal induction plate to leave, the sensor sends a signal, and the motor rotates to transport the cloth, and then the automatic control of tension feeding can be realized.
- Nose line installation device: The power of the nose line comes from the feeding motor. The nose line is first corrected by the nose line correction wheel. The corrected nose line is sent to the cutting mold by the feeding motor for cutting, and then pushed into the nose line welding position through the rear motor for down pressing and fusion.
- Fusing device: After the cloth enters the tooth mold, it is welded by ultrasonic.
- Ear Loop feeding: The Ear Loop is rotated and clamped and wound on the rotating disk. With the rotation of the rotating disk, the Ear Loop tension belt should move upward. The Ear Loop induction switch senses that the induction ring leaves the induction point and starts the motor. The motor drives the Ear Loop puller to transport the ear belt.
- Mask folding device: The cloth will fold in half after passing the slope
- Finished welding device: After folding, the products are welded together by ultrasonic.
- Finished product cutting device: The cutter rotates the cloth through the middle to make the product shape
- Discharging: The rotating mechanism drives the belt to rotate so that the products flow out along the belt direction.
FAQ
Q1: What is the guarantee of the machine?
A1: The guarantee period of our machine is 12 months after the
machine is installed well in buyer's factory;
Q2: What package do you use for the machine?
A2: Painted the machine with anti-corrosion oil, and then covered
with plastic film, and then packed into wooden case or fixed onto
wooden pallet as per clients' requirements, or shall be loaded into
container with film packing. After fixed all machines, we will use
drying agent to keep container inside dry.
Q3: Do you have instruction manual to guide us if i buy the
machine?
A3: Yes, we supply detailed user manual for your reference. PLS
read it carefully for guide. If there is still problem which could
not be solved, PLS contact us, we are ready to help you anytime.
0.8Mpa Ear Loop Disposable Mouth Mask Making Machine
Inquiry Cart
0