Anti-Corrosion Resistant APGM Drilling Rig Mats For Oilfield Drilling Site

Rig mats are usually made of natural wood and the H beam or I beam. According to different requirements, there are larch wood, the coniferous pin wood, and the beam can be 140H beam or 180H beam, and the 200 I beam, etc. To confirm rig matting boards, we need to consider the mat length, width, and height. The main structure is a steel beam. Then the wood beam will be inserted into the frame tight to make sure the sufficient strength and stabilizability.

Rig mats are portable platforms. They are used to support equipment that is used during construction or oil drilling. These activities might include camps, drilling rigs, helipads, and tanks. Drilling Rig Mats can also be used as a structural roadway. Whether you need to find a passage over unstable ground, or to a pipeline, they often consist of wood, rubber, or steel. Let’s dive in to understand what drilling rig mats are, and why they are extremely helpful.

Please find the general specification of the rig matting board

On Land Oil Rig Protection

These drilling rig mats help to protect the natural earth. It also allows workers to access sites regardless of condition. Whether you need to work in the rainy or wet reason, or the ground is simply wet and unsteady, an on-land oil rig mat can help immensely to support your equipment.

Providing Safe Work Environments
Used on wetlands or ice surfaces, many companies in the mining industry also choose to use drilling rig mats. This is because if you need to store equipment or materials, this is a safe place to do so. These mats can also help vehicles to ride over terrain as a temporary road in remote locations.

Types of Materials Used to Make Rig Mats

Steel
Most often rig mats are made with steel frames. Often, these are also made with wooden crossbeams for optimal performance. Unfortunately, the downside of wood and steel mats is that they can become exceedingly expensive. They are also hard to transport and require special equipment to do so.

Wood
Wooden rig mats on their own are a lightweight and affordable option. These may not be able to handle extremely heavy loads and they should also be taken care of because they require frequent repairs and damages.

Composite
Many modern companies are now moving to use composite rig mats. These rubber mats are not only able to contain a higher strength, but they also weigh less. Rubber rig mats are used by both work surfaces, by temporary roads, and they end up weighing less than all mats. Composite mats also typically have interlocking edges, which is a very versatile option.

Why Use Rig Mats

There are many reasons why companies use rig mats. Most of these reasons include:

• Helping to extend drilling seasons: This allows workers to continue to drill even if the ground conditions are not favorable.
• Create even work surfaces: By having a stable work surface, the terrain will not be an issue.
• Protect the environment: Many different regulations are required, but being eco-friendly is good in all aspects of the business as well.
• Using rig mats provides the opportunity to protect the environment. You can also protect the earth from contaminates that might come from your workstation.
• Work on difficult terrain: Instead of spending hours attempting to regulate and even out your work surface, instead you can simply place a rig mat and get to work.

Common sizes are 8’x10’, 8' x 20', 8' x 30', and 8' x 40'. The size is also flexible and custom-designed. One great advantage is the ease of repairing the wooden inserts which give new life to an already long-lasting and durable mat

All rig mats produced by Aipusolids control will be qualified and reliable. We do following to give users confidence.

1. The raw material. Including the steel and the wood. Selected strictly according to executive code.
2. Wood will be processed under an anti-corrosion procedure
3. We do the inspection and all processes step by step to ensure users' high-performance products.
4. Painting the rig mats with famous brand marine coating oil, which is high anti-corrosive.
5. Custom-built size and design as per clients' demand.

Aipu can produce rig mattings according to clients' certain requirements. Any demand? Please let us know

Oilfield drilling rig mats application

• Used as the equipment foundation for drilling rig, Triplex mud pumps, Mud tanks, Power rooms, SRC house, Oil tanks, Water tanks, in order to ensure the steadiness when the drilling equipment is placed at the drilling sites.
• Rig matting is suitable for all kinds of ground surfaces, especially for loose formation. Directly putting on the ground is available because of the large contact area, lower limits to the ground. When the ground loading capacity is≥06Mpa, and ground flatness ≤ 40mm, the rig matting can be working.
• It replaces the traditional concrete foundation, reducing the drilling costs, improving economic efficiency, and saving the land.

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait, UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.