Add to Cart
HDD shale shaker is the main equipment for drilling mud separation through shaker screen with stainless steel wire. HDD means horizontal directional drilling for city construction works which is much more convenient than digging. The shaker can separate drilling cuttings 100 to 400 microns size depending on screen mesh selection. The HDD drilling normally requires small footprint, lower mud flow capacity, effective working performance and economic option.
Hunter-DD shale shaker technical specification
Model | Hunter-DD |
Vibrator Motor | 1.94 kW x 2 |
Vibration Strength | 7.0/8.0 |
Treating Capacity | 200 m3/h |
Deck Angle | -1~+5° |
GeneralScreen Panel Area | 5.45㎡ |
Panel Number | 8 |
Weir Height | 835mm |
Ex Mark | Minimum ExdII Bt4 |
Low mud flow capacity, HDD normally requires mud flow bellow 500GPM
and some big projects may require mud flow capacity 500 to 1000GPM.
Compact size is very important, the whole shaker with buffer box
better no larger than tank width. So that the whole shaker will sit
on top of tank without disassemble while transport for fast moving.
Buffer box installed on tank of shaker skid to minimum shaker
length to maximum shaker size but minimum shaker length for fast
moving.
Non-explosion proof vibrator motors and electrical control panel to
minimum cost. HDD normally working in safe environment with
explosion gas, so the electrical standard for all electricity is
not that high compares oil & gas drilling, coal bed methane
drilling or minging.
AIPU Solids Control supplies various options for shale shaker from
2 panels to 4 panels depending on mud flow capacity and shaker
screen mesh installed. Please contact us freely for shaker inquiry
and service.
Besides the Hunter-MG shale shakers, there are Hunter-D shakers.
Difference is the screen installation way and screen area. Why
clients select AIPU continuously?
High-quality with good performance. True cost-effectiveness. Many
of our clients are introduced by our regular clients. And among the
orders, almost of them are repeat orders. Clients’ repeat orders
tell many things and all of our users are satisfied with our
shakers quality and our service
Now these shale shakers under manufacture are for oil well drilling
solids control. Some are ordered along with whole system, some are
just single separated equipment
Mostly same as oil drilling mud process shaker. There are hook
strip type, framed screen. Per clients’ preference maybe also
corrugated ones. However, many users will also request the wire rod
or slot screen panel to perform better dewatering function. Some of
user will use the polyurethane screen for longer service life.
The HDD shaker screens will last longer than oil drilling mud
shaker screen. As different woking condition on mud property, on
result we need.