Hunter-MG3 Vibration Motor Solids Control Shale Shaker

Oilfield drilling mud Hunter-MG3 shale shaker for drilling mud removal

Aipu Hunter-MG3 shale shaker is the first defense of drilled solids during well drilling. Actually, the shale shaker can not be only used in oil well drilling but also the HDD or piling desanding, the TBM, CBM and so on. Hunter-MG3 Shale shaker is a great equipment to process drilling fluids.

What detail specification of Hunter-MG3 shale shaker?

Hunter-MG3 shale shaker is linear motion shaker and capacity is over 110m³/h. When operate shaker in daily work the gravitational force of vibrators is up to 7.0G. The feeder box is top open with the cover bolted well. But the inlet port is usually at box wall center but close to bottom. There is a division line at the feeder box base and controlled by a hand break butterfly valve. The division line helps much on flow direction control, especially when we need to change the screens

The weir structure effectively reduces the impact force of drilling fluid onto the screen and enables the drilling fluid to evenly spread over the screen surface.The submersible bypass valve can easily open and close the silted feeder bottom.

Screen panels for Hunter-MG3 are framed type. They can be steel frame and composite frame. The color of screen panels can be yellow, green, and orange. Usually, the motors are Martin brand, while some are OLI or Ital-Vibras brand according to clients' preference and actual demand. The shaker deck angle adjustment is ranged -1~+5°. During operation, the deck angle is adjusted accordingly based on drilling mud condition, the cuttings condition, and flow rate situation

Specification on Hunter-MG3 shaker

Hunter-MG3 shale shaker flow rate

It's up to 110m³/h. The high efficiecny and the great separation effect surprise many clients.

Uphill angle will help to get discharge drier, downhill angle will help to get flow rate increased since the mud flow velocity is higher.

Other design or option on Hunter-MG3 shaker

We treat the Hunter-MG3 shale shaker as the original and initial shaker.

Another different design is feeder box inlet port position. We usually set it at bottom side close to the feeder box base. But it can be set at center or higher according to client's preference. Of course the internal structure may vary if ncessary.

We provide customzied option on color, too. According to our record recently, most of our clients select AIPU cyan. It's rather marked and beautiful. For screen panels, we can make it steel frame or composite frames. If clients request, they can be the corrugated pattern.

Besides common dual tame shaker, we produce the double decked dual tandem shaker, too. Now the users ordered Double decked dual tandem shaker are very happy with our shaker quality and performance.

Do you need Hunter-MG3 shale shakers? Please trust AIPU will be your ideal partner on shaker solutions and solids control.

Why Aipu Hunter-MG series shale shaker?

Besides the Hunter-MG shale shakers, there are Hunter-D shakers. Difference is the screen installation way and screen area. Why clients select AIPU continuously?

High-quality with good performance. True cost-effectiveness. Many of our clients are introduced by our regular clients. And among the orders, almost of them are repeat orders. Clients’ repeat orders tell many things and all of our users are satisfied with our shakers quality and our service

Now these shale shakers under manufacture are for oil well drilling solids control. Some are ordered along with whole system, some are just single separated equipment

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait, UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.