Oil Drilling Mud System Decanter Centrifuge Single Screw Pump

APG Screw pump for decanter centrifuge in oil drilling mud system

APG Screw pumps are for decanter centrifuge feeding. Compared to submersible slurry pump, such pump is higher price and it's horizontally installed instead of vertical position. It's a positive-displacement pump consisting one or more screws to move fluid or solids along the axis. For drilling mud process system, screw pump is usually the single screw rod.

Screw pumps mainly cosisted of discharge port, the stator, the rotor, the flexible section, middle axis, suction room, seal, bearing, drive shaft, bearing body. Among these parts, the wearing parts are the rotor and stator. The screw pump wet parts can be made of Stainless, steel, and the high quality rubber. According to different fluids content and property, we'll provide the certain configuration on screw pumps. For example, the abrasive material we kindly suggest use the special rubber instead of stainless steel. As we know, the S.S can't adapt abrasive material but corrosive material.Compared to other pumps, screw pump is not easy to lead swirl. This help much to maintain pump capacity. It is not sensitive to viscosity so it is capable to transfer material with high viscosity

Screw pump transfer drilling fluid via the screw conveyor rotation. Center screw pole is the positive pole, the two sides screw conveyor are negative pole. Negative poles rotate at opposite direction with positive pole.

Actually when the screw axis is rotating, lower V room will become large. V room will close against fluid sucked. Closed room will be pushed forward along axle. Then new suction cavity generates on suction end. One and one closed cavity move forward, the fluid will be pressed out.

How to select screw pump? Yes. It's depending on the centrifuge flow rate request. The screw pump APG series holding capacity from 8m³/h-350m³/h. Besides the solids control system, screw pump can be used in other application, too. For drilling mud process, the centrifuge feeding pump is rather typical use of screw pump. Compared to other pumps, screw pump holding shorter life or operation life considering the wearing parts. But it's compact and high effect, many users prefer it then

Plese check below technical specification for your reference.

For any interes or demand on the centrifuge screw pump, please feel free to contact us. You will get free offer very soon.

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait, UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.