Product Details
IP66 LED Security Flood Light
Outdoor led security flood lights 150W 110VAC 50/60Hz optic beam 15
degree IP66
The most efficient & versatile industrial LED Area Lighting
system on the market!
We stand behind our industry leading warranties with proven
real-world results in the world’s most challenging environments and
extensive
quality control testing. Additionally, whilst some other
manufacturers may require a minimum threshold of 10% or more of LED
components
to fail in order for a product to be defective, we do not require
this because the safety and productivity of your work site is of
paramount
importance to us.
150W FK Floodlight
Model | LCD-FK-155 | Replacement |
Power | 150W | 150W FK floodlight with high lumen 120lm/w, can replace 500W MHL,
70% energy saving, and long lifespan. |
Voltage | 100-240VAC |
Lumen | 18000LM |
PF | >95 |
CCT | 2800-6500 K |
CRI (Ra) | >75 |
IP Rate | IP66 |
LEDs | LUMILEDs SMD3030 |
Power Supply | Meanwell/philips |
Lifespan | >50,000hr |
Housing | Aluminum |
Operating Temperature | -30°C~ 50°C |
Beam Angle | 60°/ 90°/ 120° |
Warranty | 5 years |
Certification | CE -RoHs-SAA-ETL-TUV |
Details:
• 5-10 year warranty
• Up to 170 lm/W
• 100-277V AC, 50-60 Hz / 120-250V DC power supply
• 1,700 - 51,000 lumens
• Indoor, outdoor and harsh areas
• Easy installation retro-fit options available
• 8 optical patterns: 7° 15° 30° 60° 90° 120°, asymmetric 40°, wide
(oval) TYPE 3 / 4 / 5.
• >70 CRI
• CCT: 6500K, 4000K & 3000K
• 0-10V dimming down to 5%
• Ideal for 10’ (3m) to > 60’ (20m) mounting heights
CAUTION
RISK OF PRODUCT DAMAGE
- Never connect luminaires and/or components under load with supply
voltage turned on.
- Do not mount or support these luminaires in a manner that can cut
the outer jacket or damage wire insulation.
- Do not restrict fixture ventilation. Allow for some volume of
airspace around luminaire. Avoid covering luminaire with
insulation, foam or other material that will prevent convection or
conduction cooling.
- Do not exceed luminaire maximum ambient temperature.
- Do not modify the luminaire.
- Only use luminaire in its intended application and location.
- Led products are polarity sensitive. Ensure proper polarity before
installation.
- Electrostatic Discharge (ESD) can damage LED. Personal grounding
equipment must be worn during all installation and servicing of the
luminaire.
- Do not touch individual electrical components as this can cause
ESD, shorten LED life, or impact LED performance.
- Always read the luminaires complete installation instructions prior
to installation for any additional luminaire specifific warnings.
- In the case of HID or Fluorescent luminaires, regular re‐lamping is
required to keep luminaire operating within safe limits
- Do not install damaged product. Handling and installing damaged
products can potentially increase the risks mentioned In case of
damage and/or missing parts upon arrival of the luminaire, please
contact us.
- These instructions do not purport to cover all details or
variations in equipment nor to provide every possible contingency
to meet in connection with instal‐lation, operation or maintenance.
- Please see luminaire specifific Installation and Maintenance
Instruction for additional warnings or any applicable LCD or
regulatory statements. Failure to follow any of these Instructions
could void luminaires warranties.
Luminaire Maintenance
- Regular luminaire maintenance programs are recommended.
- It is recommended to clean the outside of the luminaire and the
refractor/lens.
- Frequency of cleaning will depend on ambient dirt level and minimum
light output which is acceptable to user.
- If clean water is not sufficient for cleaning, use a neutral,
synthetic, not‐scratching and not‐abrasive cleaning substance.
- Never use alkaline and/or acetous cleaning substances.
- Make sure that the cleaning substance is carefully removed by
rinsing with lots of clean water.
- LCD recommends using a cleaning solution that has a PH between 5
and 8.
Product Photos:
Company Profile
LCD-CESP is the leading innovator in Lighting design.
We strive to offer the best service to our customers
Our lighting products are market leaders and have many unique
features.
We offer a minimum of 5 years warranty.
Most of all Customer satisfaction is our priority.
Our R+D team have many years in the lighting Industry and we offer
the following skills to our customers-
Mechanical design
Electronic design
Optic testing
We are sourcing components to the highest specification.
Our manufacturing and assembly processes are to ISO 9001 and ISO
1400 requirements.
We offer customisation and design services.