Add to Cart
AISI/ASTM316L Stainless Steel Sheet With High Quality in Corrosion Resistance
1. Description
ASTM316L stainless steel has a wide range of uses. Due to the
addition of Mo, the carbon content is lower than 316 steel, and the
resistance to intergranular corrosion is better, so its acid-base
corrosion resistance, atmospheric corrosion resistance and high
temperature strength are particularly good, which can be used under
severe conditions; it has excellent work hardening (non-magnetic);
high temperature strength; solution state is non-magnetic; the
appearance of cold-rolled products is glossy and beautiful.
Compared with 304L stainless steel, its price is higher. It is
widely used in chemical equipment, high temperature boiler, food
industry, nuclear industry, paper industry, etc.
Advantages of ASTM316L Stainless Steel Sheet
1) Cold rolled products have good glossiness and beautiful
appearance.
2) Due to the addition of Mo, the corrosion resistance, especially
the pitting corrosion resistance, is excellent.
3) Excellent high temperature strength.
4) Excellent work hardening (weak magnetism after work).
5) The solution state is nonmagnetic.
Thickness that we offer
1) Thin plate (0.2mm-4mm)
2) Medium plate (4mm-20mm)
3) Thick plate (20mm-60mm)
4) Extra thick plate (60-115mm)
Board width that we offer
1000mm, 1220mm, 1250mm, 1500mm, 1800mm, 2000mm
2. Chemical composition
ASTM316L | C | Mn | P | S | Si | Cr | Ni | Mo |
Less Then % | 0.03 | 2 | 0.035 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
3. Physical Properties
Density | 7.98 g / cm3 |
Tensile strength σ B (MPA) | ≥ 620 |
Conditional yield strength σ 0.2 (MPA) | ≥ 310 |
Elongation δ 5 (%) | ≥ 30 |
Hardness | HRB<90 HV<200 HBS<187 |
4. Delivery surface states
We offer various surface treatment states. Normally, wiredrawing,
mirror (8K), oil film (HL), titanium plating, cutting, folding,
bending, punching, rolling, embossing, punching, gouging, laser,
water knife cutting, etc.
Some abbreviated forms of surface treatment name
No.1 - A rough, matte surface that is hot rolled to a specified
thickness, annealed, and descaled for use without surface gloss
1D - the surface has discontinuous particles, also known as fog
surface. Processing technology: hot rolling + annealing shot
peening pickling + cold rolling + annealing pickling.
2D - slightly glossy silver white. Processing technology: hot rolling +
annealing shot peening pickling + cold rolling + annealing
pickling.
2B - silvery white, better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling + quenching and
tempering rolling.
BA - excellent surface gloss, high reflectivity, like mirror surface.
Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling + surface polishing +
quenching and tempering rolling.
NO.3 - good glossiness and rough surface. Processing technology:
polishing and tempering rolling of 2D products or 2B with 100-120
abrasive materials (JIS R6002).
NO.4 - good glossiness and fine lines on the surface. Processing
technology: polishing and tempering rolling of 2D products or 2B
with 150-180 abrasive material (JIS R6002).
HL - silver gray with hairline. Processing technology: polishing 2D or
2B products with appropriate abrasive materials to make the surface
appear continuous grinding lines.
Mirro - in mirror state. Processing technology: grind and polish 2D or 2B
products with appropriate abrasive materials to mirror effect.
5. Details picture
6. Standards table
CHINA | USA | JAPAN | GEMANY | ||
GB | AISI/ASTM | UNS代号 | JIS | DIN17006 | DIN17007 |
1Cr17Mn6Ni5N | 201 | S20100 | SUS 201 | ||
0Cr18Ni9 | 304 | S30400 | SUS 304 | X5CrNi18-10 | 1.4301 |
(0Cr19Ni9) | |||||
0Cr19Ni10 | 304L | S30403 | SUS 304L | X2CrNi19-11 | 1.4306 |
(00Cr18Ni10) | |||||
0Cr25Ni20 | 310S | S31008 | SUS 310S | X12CrNi25-21 | 1.4845 |
0Cr17Ni12Mo2 | 316 | S31600 | SUS 316 | X5CrNiMo17-12-2 | 1.4401 |
X5CrNiMo17-13-3 | 1.4436 | ||||
00Cr17Ni14Mo2 | 316L | S31603 | SUS 304L | X2CrNiMo18-14-3 | 1.4435 |
0Cr19Ni13Mo3 | 317 | S31700 | SUS 317 | X2CrNiMo17-13-3 | 1.4439 |
00Cr19Ni13Mo3 | 317L | S3703 | SUS 317L | X2CrNiMo18-16-4 | 1.4438 |
(00Cr17Ni14Mo3) | |||||
(1Cr18Ni9Ti) | X12CrNi18-9 | 1.4878 | |||
0Cr18Ni10Ti | 321 | S32100 | SUS 321 | X6CrNiTi18-10 | 1.4541 |
0Cr18Ni11Nb | 347 | S34700 | SUS 347 | X6CrNiNb18-10 | 1.455 |
00Cr22Ni5Mo3N | S31803 | DP2 | 1.4462 |