Add to Cart
6w 10w 532nm Green Laser Marking Machine For PCB / QR Code
Introduction:
Based on the large energy of 532nm laser, the selectivity of
marking materials is much better. Compared with traditional laser
marking machine, it has the advantages of low energy consumption
and easy maintenance.
Specifications:
SPECIFICATIONS FOR GREEN LASER MARKING MACHINE | ||
Laser power | 6w | 10w |
Laser wavelength | 532nm | 532nm |
Laser beam Quality (M2) | <1.5 | <1.5 |
Laser repetition frequency | ≤50KHz | ≤50KHz |
Standard engraving range | 100×100 mm | 100×100 mm |
Optional engraving range | 50×50--250×250 mm | |
Engraving depth | ≤0.1mm | ≤0.1mm |
Engraving speed | ≤20000mm/s | |
Minimum line width | 0.015mm | 0.025mm |
Minimum character | 0.2mm | 0.2mm |
Repeatability | ±0.001mm | |
Power consumption of the whole machine | 1.5KW | 2.0KW |
Voltage | 220V/single phase/50Hz/10A |
Main Features:
1. Stable power output, superior beam quality, making marking more
precise and higher definition;
2. Semi-cold light source, small heat affected area;
3. A wide range of applicable materials, to make up for the problem
of many materials using fiber laser marking is not delicate enough.
Advantages:
1. Marking accuracy under 10μm, neat in marking edge and no thermal
deformation, it improves the passing rate of finished products
effectively;
2. Advanced hardware control technology and intelligent software,
easy operation, stable performance, batch processing efficiently
and economically;
3. High light-to-electricity transferability, long life, low energy
consumption, easy maintenance, save use-cost;
4. Good cooling performance, small size.
Application:
The green laser marking machine is suitable for surface processing
and coating of most metal and non-metallic materials. Such as
hardware, ceramics, glasses and clocks, PC, electronic devices, all
kinds of instruments, PCB boards and control panels, nameplate
panels,plastics, etc.;suitable for glass, crystal surface and
internal engraving, such as mobile phone screen, LCD screen,
optical device , car glass, etc. It is specially adapted to surface
treatment such as marking and engraving of high flame retardant
materials.
Marking Samples: