Digital thermal solvent-based new polymer plate

DIGITAL NEW POLYMER FLEXO PLATE

Brief introduction:
Flexo printing has low production costs, flexible process combinations, and more importantly, the use of water-based printing ink, for environmentally friendly green printing. It has the advantages of ordinary offset printing, gravure printing and other types of printing that are difficult to compare.

Our flexo plate covers different thicknesses such as 3.94mm, 2.84mm, 2.28mm, 1.7mm, 1.14mm, etc. It is used in the pre-printing of flexible packaging, high-grade colour boxes, corrugated cartons, as well as the printing of labels, handbags, beverage packs, books and magazines, etc. Solvent-washed flexo-digital plate has excellent flexibility, good ink transfer and good printing quality. Excellent, good ink transfer, soft highlight dots and shadow gradient, to ensure brilliant colour reproduction and a wide colour gamut performance, printing effect is clear, delicate, need for printing pressure is small, only need to be lighter printing pressure can be stable printing quality, improve the service life of the plate, but also to enhance the overall efficiency of the printing operation. It has the characteristics of environmental protection, high efficiency and exquisite. And according to the customer's different thickness, the use of demand for custom production.

Features:
Extremely rapid access time
Excellent ink transfer permits superior printing uniformityHigher durability for long print runsHigh exposure resolution results in better qualityreproduction
lmage relief is clean and sharpExceptional thickness uniformity-No plate swelling duringplatemaking
Less make ready time on press
High resistance to ozone and white light results in excellentstorage flexibility

Plate technical data

How to store
Correct storage of flexo plates is essential in achieving high-quality flexo printing. Therefore, you should pay attention to the following points during daily storage:
Store in a place free from sunlight and ultraviolet lamps;
Control the ambient temperature at 5ºC-35ºC;
The ink on the surface of the plate should be cleaned as soon as possible after printing and dried sufficiently
Plates should not be placed on top of each other (use paper or cushioning material to separate plates from each other);
Keep the storage room well ventilated;
Use a cleaning agent that does not swell the resin;
Consult the respective plate supplier if you are unsure of the properties of the cleaning agent yourself.