Processless Thermal Aluminium Offset Printing Plates Chemistry Free

Processless Thermal CTP Plate Chemistry Free Offset Aluminum Plate

♥ Application

EcooGraphix ECOO-G is a new, environmentally friendly, Development On Press CTP plate.

It can be run directly on a printing press after imaging, without a need for chemical processing.

Recommended application to press procedures of ECOO-G:
1). Clean all the inks on the blanket;
2). Start the press machine, apply the water roller, run 30-40 seconds;
3). Apply the ink rollers 20-30 seconds;
4). Apply the paper and start print.

Remark: If operate step 2 and 3 longer, paper will be wasted less.

♠ Specification

Model ECOO-G

Plate Type Thermal-negative type

Application High grade commercial and newspaper printing

Substrate Electrolyte graining and Anodized AL substrate

Thickness 0.15mm/ 0.30mm

Maximum Short Grain Width Maximum width 1,280 mm

Spectrum Scope 800-850 nm

Photosensitive Wave Length 830 nm

Platesetter Various dominant thermal platesetters in the market

Coating Color Grey

Low-energy Imaging 130-150 mj/cm²

The Period Of Latent Image Stabilization ≤ 7 days

Recommended Screen Method 1-99% @200 LPI AM or 20μm FM or mixture

The Paper Number Of Start-up < 50 sheets

Safety Light 4 hours under yellow light; 1 hour under fluorescent lamp;

Direct exposure under natural light is safe but not recommended.

Processing Without processing, directly on press

Run Length 100,000 impressions; Actual run length depends on printing conditions

Shelf Life 12 months under recommended condition

Transportation Packed in seal and stored by means of prevention from light, moisture,

overheat and high humidity

Storage Recommended condition: 18ºC-24ºC, 40%-50% RH.

​

​

Applied parameters in imaging device

​

*Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length;
while over high/low exposure energy will affect the image quality negatively.

ECOO-G Processless CTP Plate Video: https://youtu.be/LLqNaY1ivcI

​
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution;
while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.

♣ Success Case

♥ Producing And Packaging

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.