Positive Offset PS CTP Printing Plates Uniform Surface Coating

Long Run Positive PS CTP Plate For Offset Printing

1. Characteristic

1) Uniform surface coating and high photosensitive speed.

2) High resolution and higher press run.

3) Precise half-tone dot reproduction.

4) Faster exposure and good stability.

2. Specification

Model

ECOO-PS

Plate Type

Positive PS Plate

Application

Commercial and newspaper printing

Substrate

Electro chemically grained and Anodized lithographic aluminum

Gauge

0.15, 0.20, 0.25, 0.30, 0.40(mm)

Maximum short grain width

Maximum width 1280 mm

Power of light

3,000 - 5,000 w

Length of Run
Unbaked: 50,000 to 100,000 impressions;
Baked: Over 100,000 impressions

(dependent upon image resolution, press, press chemical, ink and paper conditions).

Processor

All brands or Manual

Aluminum

Standard 1050 Alloy

Developing time

20-30 sec

Spectral Sensitivity

320-405 nm

Resolution

1-99% @ 300LPI

Image Color

Green

Developer

Any positive plate developer or our own developer

Processing temperature

20-25ºC

Processing Speed

0.80-1.20 m/min

Safelight

Handle under yellow safe light(UV free)

Shelf life

12 months under recommended storage conditions

Packaging

Available in all standard formats, including bulk packaging options such as APL packaging

Storage and handing

Stored in a cool and dry environment, away from excessive cold, heat and humidity

​

​

3. Application

EcooGraphix PS Plate or conventional analog plate can be used for offset/lithographic commercial and newspaper printing. Unique production technology and high quality raw materials make the plate gain high photosensitive speed, good half-tone dot reproduction and stable performance.

4​. Producing And Packaging

From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.

5. Certificates

6. FAQ

Q1: Can I get the sample ?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight ?
A: The air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the pick-up service from your local agent.

Q3: How long can the sample be ready ?
A: It usually takes about 3 days to prepare the sample.

Q4: Can I visit your factory ?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou city, which is about 1.5 hours by train from Shanghai.

Q5: How many square meters CTP plates can feed one 20' container ?
A: About 20000-25000sqm.

Q6: Can I take my own brand and label on the packing ?
A: Yes, we can provide the OEM with the customer's brand and label.

www.ecoographix.com