Negative Processless DOP CTP Offset Printing Plates
Brand Name:ECOOGRAPHIX
Certification:ISO
Model Number:ECOO-G
Minimum Order Quantity:1SQM
Delivery Time:about 30days
Payment Terms:L/C, T/T, L/
Contact Now
Add to Cart
Verified Supplier
Location:
Hangzhou Zhejiang China
Address:
Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Non Chemical Prepress Negative Processless DOP Offset CTP Printing
Plate
Direct on Press CTP Plate
Environmental-friendly and Cost-effective
ECOO-G Thermal DOP plate (Development On Press, Processless)
ECOO-G thermal CTP plate is a new environmental-friendly
processless printing plate. ECOO-G plate can run on press machine
directly after CTP exposing, no need chemistry processing. It is
double layer plate: emulsion layer is on the aluminum, and
protection layer is above emulsion layer.
The emulsion layer is negative photopolymerization /cross-link, can
be exposed by 800-850nm wave-length. So all the known thermal CTPs
(can expose normal thermal plate) on the market can expose this
plate, only set up the exposure parameter to "negative".
The protection layer is water-soluble polymer. It is mainly used to
protect the emulsion layer high sensitivity (low exposure energy
required), and from damaging as well. Therefore, it is important to
keep the plate away from any water, steam or even sweat materials.
ECOO-G plate will be affected by high temperature and high
humidity. Recommended shipment and storage condition is 18-25 OC, RH 30-50%.
| Plate Technical Specification | ||
| Model | ECOO-G | |
| Plate Type | Non-ablation thermal-negative type | |
| Application | High grade commercial and newspaper printing | |
| Substrate | Electrolyte graining and Anodized AL substrate | |
| Thickness | 0.15mm / 0.30mm | |
| Spectrum scope | 800-850nm | |
| Platesetter | Various dominant thermal platesetters in the market | |
| Low-energy imaging | 130~150mJ/m² | |
| The period of latent image stabilization | ≤7days | |
Recommended screen method | 1~99 @200Lpi AM/20u FM and mixture | |
| The paper number of start-up | <50 sheets | |
| Safety Light | 1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light | |
| Processing | Without processing,directly on press | |
| Run Length | 100,000 impressions,actual run length depends on printing conditions | |
| Baking | No recommended | |
| Characteristics | ||
| Negative non-ablation photosensitive system | ||
| Compatible with the dominant devices in the market | ||
| Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter | ||
| Good dot reproduction,stable performance,wide processing latitude | ||
| Long stability of latent image,can be stored at least a week after plate-making | ||
| High quality aluminum substrate,professional coating formulation | ||
| Application | ||
| Suitable for sheet-fed offset press or high speed rotary offset press | ||
| Run length:100,000 impressions | ||
| Suitable for different types of traditional inks and fountain solutions,including alcohol’s substitutes as fountain solutions | ||
| Unsuitable to improve run length by baking plates | ||
| Transportation and Storage | ||
| Packed in seal and stored by means of preventing from light/moisture,over heat and high humidity. | ||
Our Production Lines
Negative Processless DOP CTP Offset Printing Plates
Inquiry Cart
0