登录免费注册 “贸易通"多语言推广外贸旺站免费建站外贸论坛

China Categories

Home Products Suppliers Selling leads

English

Home /Other Earthwork Products /

Cement Blanket Gccm Rolls Geosynthetic Cementitious Composite Mat 5mm-13mm for slope protection and ditch lining

Brand Name:PIONEERTEX

Certification:ISO9001 & SGS

Model Number:CMC5

Minimum Order Quantity:1500 square meters

Delivery Time:3-4wks

Payment Terms:T/T

Contact Now

Add to Cart

CHANGZHOU PIONEER TEXTILE TECHNOLOGY LTD

Verified Supplier

Location: Changzhou Jiangsu China

Address: NO.198,YUNHE ROAD,ZHONGLOU DISTRICT,CHANGZHOU CITY,JIANGSU PROVINCE,CHINA.

Supplier`s last login times: within 34 hours

View Contact Details

Shipping

lt's easy to get a shipping quote! Just click the button below and complete the short form.

Get Shipping Quote

Product Details Company Profile

Product Details

5MM FLEXIBLE Concrete Mat Cloth GCCM ON ROLLS

PERMANENT EROSION CONTROL FOR DITCH LINING AND EROSION CONTROL-

Concrete Mat Cloth GCCM Physcial Properties
CMC	Thickness (mm)	Mass(unset) (kg/m2)	Density(unset) (kg/m3)	Density(set) (Kg/m3)	Roll Width (m)
CMC5	5	8	1500	20%	2.1
CMC8	8	11	1500	20%	2.1
CMC13	13	18	1500	20%	2.1
.
Pre-set CC Properties
Setting
Working time: 1-2 hours subject to ambient temperature.
CC will achieve 70-80% strength at 24 hours after hydration.

Method of hydration
Spray the fiber surface with water until it it feels wet to touch for several minutes
after spraying.

Re-spray the CC again after 1 hour if:
1.installing CC in a steep or vertical surface;
2.Installing in warm climates;

Notes:
1.CMC can not be over hydrated and an excess of water is always recommended;
2.Minimum ratio of water:CMC by weight: 1:4
3.Don't jet high pressure water directly onto the CMC as this may wash a channel in CMC.
4.Please use non-saline water for hydration.If CMC will be used for sea projects,please
advise us beforehand.
5.CMC can hydrate and set under water;
6.CMC has a working time of 1-6hours after hydration. Don't move or touch CMC
once it has begun to set.
7.Working time will be reduced in hot climate;
8.CMC will set hard in 2-3 hours,but will continue to gain strength for several months.

Set CC Properties

Strength: PioneerTex Concrete Mat Cloth has very high early strength

Item		Test Method		MARV
Compressive Strength		ASTMC109-02		35-40 Mpa
Bending Strength		BS EN12467:2004		3-6 Mpa
CBR Puncture Strength		EN ISO12236:2007		3.5KN

	Tensile Strength(KN/M)
	Length Direction		Width Diection
CMC5	25		20
CMC8	28		24
CMC13	32		28

Other
Item		Test Method		Value
Freeze-thaw resistance		BS EN12467:2004 Part5.5.2		pass
Soak Dry		BS EN12467:2004 Part5.5.5		pass
Water Impermeability		BS EN12467:2004 Part5.4.4		pass
Fire Retardant		16 CFR PART 1633		pass

Who are we?

PioneerTEX is the professional and leading manufacturer of Concrete Mat Cloth rolls in China.

We have the patent for Concrete Mat Cloth in China.

We developed Concrete Mat Cloth Since 2014, and we get the patent in 2017.

And the technolog for Concrete Mat Cloth is mature in 2016.

What is Concrete Mat Cloth (CMC) GCCM ?

CMC GCCM is a flexible and soft cement impregnated fabric, that hardens on hydration to form a thin,durable,water proof and fire retardant concrete layer. Essentially, it's concrete on a roll.

What's the structure of Concrete Mat Cloth GCCM?

CMC GCCM was made of woven geotextile, nonwoven geotextile, HDPE geomembrane, and 3D structure geocomposite fabric.

The specially formulated dry concrete powder mix will be reinforced by 3D mesh geo-fabric, and sandwiched between porous nonwoven geotextile and water proof HDPE geomembrane or Aluminium Foil composite.

How does the Concrete Mat Cloth CMC GCCM work?

CMC GCCM allows concrete construction without the need for plant or mixing equipment. It's very easy, and just add water on the CMC non-waterproof side.

Once Set, the 3D mesh fabric will reinforce the concrete, prevent crack propagation and provide a safe plastic failure mode. The woven and nonwoven geotextile on the top side will offer special protection on the CMC, and offer higher tensile strength for composite.

HDPE geomembrane backing on the bottom surface of CMC ensures the material is completely water proof.

How many types of Concrete Mat Cloth GCCM are we manufacturing?

CMC GCCM is available in 3 thickness:

CMC5,

CMC8

CMC13.

Concrete Mat Cloth GCCM ADVANTAGE:

Rapid Install

CMC can be laid at a rate of 150m2/hours ,up to 10 times faster than conventional concrete solutions.

Easy to Use

CMC is available in man portable rolls for application with limited access such as 10mts long. It's also very easy to cut by "box cutter". The conncrete inside of CMC is pre-mixed so there is no need for mixing or compacting.

Lower Project Cost

The speed and ease of installation mean CMC GCCM is more cost-effective than conventional concrete,with less logistical complexity.

Eco-friendily

CMC is a low mass, low carbon technology which uses up to 95% less material than conventional concrete for many applications.

Long Expectation Life

CMC is made of high strength geotextile and special cement mixture. Its expectation life can reach more than 30 years. What's more, it is of no need for maintenance.

Concrete Mat Cloth GCCM Key Properties

Water Proof

The HDPE Geomembrane backing on the bottom surface of the CMC ensures that the CMC GCCM has excellent impermeability.

Strong-High Strength

The 3D mesh fabric reinforcement prevents CMC from cracking, absorbs energy from impacts. The HDPE geomembrane and geotextile will improve CMC composite strength after adding water.

Durable

CMC is twice as abrasion resistant as standard OPC Concrete, has excellent chemical resistance, good weathering performance and will not degrade in UV.

Flexible and Soft

CMC GCCM has good drape characteristics and will closely follow the ground profile and fit around existing infrastructure. Unset CMC can be cut or tailored by basic hand tools.

Sealing Edge

The cement powder inside of CMC will not come out from the edge because of special sealing edge.

Company Profile

Production Base Address:

No.18, Shibei Road, DaqingBeilu Road, Yizheng, Yangzhou City,Jiangsu Province China.

Export and South China Sales Office:

C-7,Xingpu Commercial Distric,Huangpu,Zhongshan,China.

Export Changzhou Company:

No.198 Yunhe Road: Zhonglou district, 213000,Changzhou city,China.

PTT CHINA is a technical textile group company, and it was divided into PTT HK and PTT China. PTT HK is the headquarter company, and it specialize in international investment and financial management. PTT CHINA specializes in new products development, production and sourcing.

CHANGZHOU PIONEER TEXTILE TECHNOLOGY LTD belongs to PTT CHINA. Which was an ISO9001:2015 and ISO14001:2015 certified manufacturer in Concrete Mat Cloth GCCM, Dewatering Geotube & Geobag, Concrete Revetment Mattress, needle punch nonwoven felt, woven and nonwoven geotextile and its relevant composite.

Our production base was established in 2001. So far we have 4 needle punch production lines in Yizheng city, Jiangsu province. In order to expand production catalogue, we launched one lamination machine and around 10 special industrial sewing machines in 2003.

In addition to needle punch nonwoven, film laminated nonwoven, bags we also have 20 sets of jet loom to produce woven geotextile for geotube, and special High Strength woven geotextile for reinforcement. We also worked with other manufacturers such as warp knitted geo-grid, sheet drain (drainage sheet) to produce composite material based on needle punch nonwoven and woven geotextile.