Diaphragm Valves Compact Intelligent Digital Valve Positioner
Brand Name:POWERFLOW
Certification:ISO9001. CE. Nepsi. ROHS
Model Number:1880
Minimum Order Quantity:1 Nos
Delivery Time:10-15 Days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Hangzhou Zhejiang China
Address:
Unit E, NO.11 XiYuan Eight Road, XiHu District, HangZhou City, Zhejiang Province, China.
Supplier`s last login times:
within 46 hours
Product Details
Company Profile
Product Details
1880 Series Most Compact Intelligent Electro-pneumatic Valve positioner for Diaphragm Valves
1. Product Description
The 1880 valve positioner is a electro-pneumatic positioner. It's designed to be applied in general industries. This positioner can work inherently with single-acting linear valves. It provides self-calibration and automatic adaptions to the actuators being controlled. The linear travel range of 1880 positioner can be 5-30mm. It's the most compact smart positioner in current market.
2.Technical Datas
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min |
| Stroke Control Range | Linear 5-30mm |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP66 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
3. Product type selection
Remark:
The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.
4. Interface angle adjustment
The angle can be adjusted between the positioner and the valve. If need to adjust the interface angle, rotate the main body casing clockwise or counter-clockwise in 180°range.
5. Electrical connections and pneumatic connections
| X1 | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pin | Description | Signal type | ||||||
| 1 | Analogue signal output + | 0/4 - 20 mA | ||||||
| 3 | Analogue signal output GND | GND | ||||||
| X3 | ||||||||
| Pin | Description | Signal type | ||||||
| 1 | Power supply + | +24 V | ||||||
| 2 | Power supply GND | GND | ||||||
| 3 | Set signal input | 0/4 - 20 mA | ||||||
| 4 | Set signal input GND | GND | ||||||
| P | Air supply enter (built-in filter, filter size 5μm |
|---|---|
| R | Air exhaust |
| A | Pilot air outlet |
6. Additional software functions
- Selection of the transfer characteristic between set-point value and stroke
- Sealing function for position controller
- Effective sense of direction between input signal and set-point value
- Limit of the mechanical stroke range
- Setting for control parameters
- Safety position setting for the position controller
- Configuration of signal level fault detection
- Configuration of the outputs
- Calibrating the control parameters
- Setting for manual control rate
- Code protection
Diaphragm Valves Compact Intelligent Digital Valve Positioner
Inquiry Cart
0