

Add to Cart
PWM Solar Charge Controller Manual For Solar Home System
Parameters:
System voltage | 12V/24V Auto |
System current | 10A;20A |
No-load loss | < 12mA |
Solar energy input voltage | < 55V |
Overvoltage protection | 17.0V;×2/24V |
Equal charging voltage | 14.6V;×2/24V(25℃),duration:1h |
Ascending charging voltage | 14.4V;×2/24V(25℃),duration:2h |
Float charging voltage | 13.8V;×2/24V (25℃) |
Charging recovery voltage | 13.2V;×2/24V (25℃) |
over-discharging recovery voltage | 12.5V;×2/24V |
Under voltage | 12.0V;×2/24V |
Over-discharging voltage | 11.1V;×2/24V |
USB load cut-off voltage | 10.6V;×2/24V |
Total USB load rated current | 1.2A |
Temperature compensation | -4.0mv/℃/2V; |
Overload and short circuit protection | 1.25 times of rated current: 30s; ≥1.5 times of rated current: short circuit protection |
Working temperature | -20℃to +50℃ |
Protection level | IP30 |
Weight | 140g(10A);170g(20A) |
Dimensions | 120×74×23.6(mm); (L×W×H)) |
Features:
Electronic protections:
• PV Over Current/power
• PV Short Circuit
• PV Reverse Polarity
• Night Reverse Charging
• Battery Reverse Polarity
• Battery Over Voltage
• Battery Over Discharge
• Battery Overheating
• Controller Overheating
• Lithium Battery Low Temperature
• Load Short Circuit ,
• Load Overload
• TVS High Voltage Transients
Pictures of SRNE Best Selling PWM 10A/20A Solar Controller for Solar Home System SR-HM-CU