Add to Cart
Product Description:
A lot goes in the insulating properties of the bitumen storage
tanks for sale to enable the transport of the product in the
desired temperature. it is very important for you to understand
what makes an Asphalt Tanker unique for transport the type of
product it does.
Bitumen storage tank trailers are designed to meet specific cargo
needs and therefore, There are a number of considerations to make
when transporting asphalt.
There are important checks needed during the loading,
transportation and offloading of the product that must be done to
ensure a successful process.This is to make sure that the desired
characteristics of the cargo are maintained throughout the
transportation right from the production center to the desired
destination.
Asphalt Loading Operations:
1.Offloading Asphalt. Asphalt needs offloading immediately after it
gets to the destination to minimize the colling.
2.Aspalt on Transit. Planning for truck transit should be made in
such a way that the transport rated in tons/hour closely matches
the production rate and laywdown frequency of the plant.
3.Ensure you minimize heat loss. Asphalt cools when in
transportation and this can adversely affect its characteristics on
arriving at its destination and present challenges. To prevent such
things as rain, air temperature, duration of length and wind from
causing heat loss, insulated bitumen storage tank beds and tarps
that cover the load should be put in place.
4.Avoid aggregate segregation when loading your cargo. Asphalt
mixes must be placed on the truck bed in a manner that does not
enhance aggregate segregation. Dropping the product mix directly
from the silo in one big batch creates one pile of asphalt/bitumen
mix in the bitumen tanks bed.
5.Truck bed preparation: this should be done before loading the
product. Cleaning and lubrication through the use of “release
agents” must be done to keep off foreign particles.
Specification Of Bitumen Storage Tankers:
Overall dimension: | 11500mm * 2500mm *3700mm |
Transport: | bitumen |
Tank Capacity: | 30CBM |
Bottom valve: | Aluminum API pneumatic bottom valve |
Axles: | 2/3 axles |
Suspension: | Heavy duty mechanical suspension |
Tire: | 8/12 units |
Discharging Pipe: | 4'' rubber pipe, 6m/piece, 2 pieces |
King pin: | 2/3.5 inch |
Landing gear: | JOST |
Brake system: | 2 line pneumatic brake system |
Electrical system: | Chinese standard 24V; 7 ways receptacle; LED lamps |
CIMC Bitumen Tanker Trailer for Sale
CIMC 3 axle bitumen tank for sale