ISO Automotive 25 Ton 210mm Height Air Hydraulic Jack
Brand Name:Golden Boat
Certification:CE ISO
Minimum Order Quantity:1 Set/Sets
Place of Origin:Jiangsu, China
Supply Ability:100 Unit/Units per Week
Packaging Details:Plywood box
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
No.397 Guangqin Road,Liangxi District,Wuxi,Jiangsu,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Exporting quality 50 ton air hydraulic bottle jack by ISO
Model type | 50-T2 |
Type | AIR HYDRAULIC JACKS |
Lifting Capacity | 25/50T |
Min Height | 210mm |
Max Height | 531mm |
Lifting Height | 25T:94mm 50T:102mm |
Working air pressure | 0.8-1.2Mpa |
Net weight | 60kg |
Gross weight | 77kg |
Packing size: | 1450*350*350mm |
,
Lifting:
1. Connect adequate air source to the air supply inlet(Air pressure 0.9-1.2Mpa)
2. Turn the control valve clockwise until the pump starts.
3. Transfer the load immediately to appropriately rated jack stands.
Lowering:
1. Raise load high enough to clear the jack stands.
2. Remove jack stands carefully(always used in pairs).
3. Slowly turn handle knob counter-clockwise, if the load fails to
lower:
(a). Use another jack to raise the vehicle high enough to reinstall
jack stands.
(b). Remove the malfunction jack and then jack stands.
(c).Use the functioning jack to lower the vehicle.
4. After removing jack from under the vehicle, fully retract the jack to reduce ram exposure to rust and contamination.
The detailed compenent parts:
ISO Automotive 25 Ton 210mm Height Air Hydraulic Jack
Inquiry Cart
0