WP904L Duplex Alloy SCH10 3 Inch Steel Pipe Cap

WP904L N08904(904L) S31254(254SMO) Duplex Alloy Stainless Steel Pipe Caps Pipe Fittings

904L corrosion resistance
Since the carbon content of 904L is very low (maximum 0.020%), there is no carbide precipitation in the case of general heat treatment and welding. This eliminates the risk of intergranular corrosion after general heat treatment and welding. Due to the high chromium-nickel-molybdenum content and the addition of copper, 904L can be passivated even in a reducing environment, such as sulfuric acid and formic acid.

The high nickel content makes it have a lower corrosion rate in the active state. In pure sulfuric acid in the concentration range of 0~98%, the use temperature of 904L can be as high as 40 degrees Celsius. In pure phosphoric acid in the concentration range of 0~85%, its corrosion resistance is very good. In industrial phosphoric acid produced by the wet process, impurities have a strong influence on corrosion resistance. Among all kinds of phosphoric acid, 904L has better corrosion resistance than ordinary stainless steel. Among the highly oxidizing nitric acid, 904L has lower corrosion resistance than high-alloy steel grades that do not contain molybdenum. In hydrochloric acid, the use of 904L is limited to a lower concentration of 1-2%. In this concentration range. The corrosion resistance of 904L is better than conventional stainless steel.

904L steel has high resistance to pitting corrosion. Its resistance to crevice corrosion in chloride solutions is also very good. The high nickel content of 904L reduces the corrosion rate at pits and crevices. Ordinary austenitic stainless steels may be sensitive to stress corrosion in a chloride-rich environment at temperatures above 60 degrees Celsius. This sensitization can be reduced by increasing the nickel content of the stainless steel. Due to the high nickel content, 904L has high resistance to stress corrosion cracking in chloride solution, concentrated hydroxide solution and hydrogen sulfide-rich environment.

FAQ
1.Q:Are you a factory or trading company?
A: We are a factory, has more than 20 years experience in pipe fittings production.
2.Q:Where is your factory located? How can I visit there?
A: Our factory is located in wenzhou City, zhejiang Province,China.
3.Q:How does your factory do regarding quality control?
A: We are ISO9001& PED certified by TUV. We serious control the quality from raw material to finished pipe fittings. So that we can 100% sure our goods is qualified.
4. Q: Price high ?
A: Our price is workable. We had tried use auto equipment to save Workers cost, and control other costs. like human sources, logistics etc.
5.Q: After sales service.
A: Quality are promised. If our products are not meet the contract we would like to send free goods to you.

"Zheheng Steel" is a young diversified import and export enterprise in China, dedicated to providing high-end pipe fittings and solutions to the world, our factory (Zhejiang Kindly Pipe Fittings Company) is an old brand with more than 30 years of production experience , we have been able to independently provide reliable and e stainless steel and nickel alloy products to customers around the world. To achieve one-stop service from procurement-production-sales-after-sales. it is also positioned in the mid-to-high-end market. With strict quality requirements and perfect customer customization, more than 60% of the company's products have been sold to Northern Europe, North and South America, Taiwan, and about 40% since its establishment. Some products have been served by PetroChina, Sinopec, China National Nuclear Corporation.

The company has passed the ISO9001 certification of comprehensive quality management system, ISO14000 certification of environmental management system, OHSAS18000 certification of occupational ety and health management system; obtained special equipment manufacturing license [A1, A2 (1), B (2) level] , AD2000-W0 pressure equipment material certification of German TUV, PED 97/23 / EC EU pressure equipment material certification, Russian RTN and GOST certification; successively passed China (CCS), United States (ABS),

Germany (GL), Approved by the National Bureau of Shipping (LR), Norway (DNV), South Korea (KR) and other national classification societies.

"zheheng steel" produces and supply stainless steel 45 ° / 90 ° / 180 ° elbows, equal tees, reducer tees, crosses, concentric reducers, eccentric reducers, caps, flanges, flanges, etc., Non-standard pipe fittings are also produced according to customer requirements. The company strictly implements ASTM B16.9 / B16.5,ASTM A403 SH3408, SH3409, DIN2605, EN10253, BS1965, JISB2312 and other standards for production. The materials used are special steel materials such as 304H, 304L, 321H, 316L, 317L, 310S and duplex steel 2205/31803, 904L, WP347H, WP316Ti.

Available size range:

Outer diameter seamless (SMLS): 1/2 "-20", DN15-DN500, butt welding elbow (seam): 1/2 "-48", DN15-DN1200
Wall thickness: 1mm--60mm .SCH5S -SCHXXS

Material:
Stainless steel national grades: ASTM A403 WP304, 304L, 316, 316L, 321, etc.
European stainless steel grades: 1.4301, 1.4306, 1.4401, 1.4404, 1.4571

Duplex Steel:F51/S31803,F53/S32750,F55/S32760,F59/S32520,F60/S32205,254SMO/1.4547
Nickel Alloy: ASTM / ASME S / B366 UNS N08020 | N04400 | N06600 | N06625 | N08800 | N08810 | N08825 | N10276 | N10665 | N10675 | , Inconel 600 | Inconel 601 | Inconel 625 | Inconel 706 | Inconel 718 | Inconel X-750, Monel 400 | Monel 401 | Monel R 405 | Monel K 500

Production standard:
ASME / AISI B16.9, B16.28, ASTM A403, MSS SP-43: SA182, ASME.B16.11, EN / 1092
DIN 2605, DIN2609, DIN2615, DIN2616, JIS B2311, JISB2312, JISB2313, BS4504, BS4504, BS1560, BS10

Surface treatment: rolling sand, sand blasting, pickling,
Packing: wooden box, according to customer requirements
Minimum order: 1 piece
Delivery time: 1-45 days after receiving the deposit, depending on the quantity required.
Third party inspection: BV, SGS, etc. accepted
Test: direct reading spectrometer, hydraulic tester, X-ray detector, ultrasonic flaw detector, magnetic particle detector, etc.
Certificate: ISO9001. Pressure pipeline certificate, production license, PED, etc.
Productivity: 1800 tons per year
Products are widely used in papermaking, shipbuilding, petroleum, chemical, power, bioengineering, natural gas, sewage, construction, medicine, food (dairy) and other industries.