316L BL Stainless Steel Blind Flange For Water Work

Astm A182 304 / 304L 316 / 316L stainless steel blind flange (BL)flanges ASME B16.5

"zheheng steel" is a professional manufacturer of stainless steel stainless steel flanges and various special flanges. The company is also good at the production of mechanical parts of various materials.

blind flange is also called blind plate, and its proper name is flange cover. It is a flange without holes in the middle

for sealing the pipe plug. Ansi asme b16.5 a105 flange have many types of sealing surface, such as plane, convex

, concave and convex, tenon and groove surface, and ring connection surface.

Production Range:

what is blind flange
The formal name of blind flange (blind disk) is Flange cover, and some are also called blind flange or pipe plug. It is a flange without a hole in the middle, which is used to block the pipe mouth. The function is the same as the head and tube cap, except that the blind plate seal is a detachable sealing device, and the head seal is not ready to be opened again.

The parts that connect the pipe to the pipe are connected to the pipe end. There are holes in the flange, and the bolts tightly connect the two flanges. The flanges are sealed with gaskets. Flange is a disc-shaped part, the most common in pipeline engineering, flanges are used in pairs.

Flange is divided into threaded connection (screw connection) flange, welding flange and clip flange. Flanges are used in pairs, low-pressure pipes can use wire flanges, welding flanges for pressures above 4 kg. Add a gasket between the two flanges, and then tighten with bolts.

Flange application:
Because the flange has good comprehensive performance, it is widely used in chemical engineering, construction, water supply, drainage, petroleum, light and heavy industry, freezing, sanitation, plumbing, firefighting, power, aerospace, shipbuilding and other basic projects.

Application of blind flange:

During the initial start-up preparation phase, when the strength test or tightness test of the pipeline cannot be performed simultaneously with the connected equipment (such as turbine, compressor, gasifier, reactor, etc.), the equipment and pipeline Set a blind plate at the connection.

Various process material pipes connected to the boundary area outside the boundary area, when the device is stopped, if the pipeline is still in operation, set a blind plate at the cut-off valve.

"Zheheng Steel" is a young diversified import and export enterprise in China, dedicated to providing high-end pipe fittings and solutions to the world, our factory (Zhejiang Kindly Pipe Fittings Company) is an old brand with more than 30 years of production experience , we have been able to independently provide reliable and e stainless steel and nickel alloy products to customers around the world. To achieve one-stop service from procurement-production-sales-after-sales. it is also positioned in the mid-to-high-end market. With strict quality requirements and perfect customer customization, more than 60% of the company's products have been sold to Northern Europe, North and South America, Taiwan, and about 40% since its establishment. Some products have been served by PetroChina, Sinopec, China National Nuclear Corporation.

The company has passed the ISO9001 certification of comprehensive quality management system, ISO14000 certification of environmental management system, OHSAS18000 certification of occupational ety and health management system; obtained special equipment manufacturing license [A1, A2 (1), B (2) level] , AD2000-W0 pressure equipment material certification of German TUV, PED 97/23 / EC EU pressure equipment material certification, Russian RTN and GOST certification; successively passed China (CCS), United States (ABS),

Germany (GL), Approved by the National Bureau of Shipping (LR), Norway (DNV), South Korea (KR) and other national classification societies.

"zheheng steel" produces and supply stainless steel 45 ° / 90 ° / 180 ° elbows, equal tees, reducer tees, crosses, concentric reducers, eccentric reducers, caps, flanges, flanges, etc., Non-standard pipe fittings are also produced according to customer requirements. The company strictly implements ASTM B16.9 / B16.5,ASTM A403 SH3408, SH3409, DIN2605, EN10253, BS1965, JISB2312 and other standards for production. The materials used are special steel materials such as 304H, 304L, 321H, 316L, 317L, 310S and duplex steel 2205/31803, 904L, WP347H, WP316Ti.

Available size range:

Outer diameter seamless (SMLS): 1/2 "-20", DN15-DN500, butt welding elbow (seam): 1/2 "-48", DN15-DN1200
Wall thickness: 1mm--60mm .SCH5S -SCHXXS

Material:
Stainless steel national grades: ASTM A403 WP304, 304L, 316, 316L, 321, etc.
European stainless steel grades: 1.4301, 1.4306, 1.4401, 1.4404, 1.4571

Duplex Steel:F51/S31803,F53/S32750,F55/S32760,F59/S32520,F60/S32205,254SMO/1.4547
Nickel Alloy: ASTM / ASME S / B366 UNS N08020 | N04400 | N06600 | N06625 | N08800 | N08810 | N08825 | N10276 | N10665 | N10675 | , Inconel 600 | Inconel 601 | Inconel 625 | Inconel 706 | Inconel 718 | Inconel X-750, Monel 400 | Monel 401 | Monel R 405 | Monel K 500

Production standard:
ASME / AISI B16.9, B16.28, ASTM A403, MSS SP-43: SA182, ASME.B16.11, EN / 1092
DIN 2605, DIN2609, DIN2615, DIN2616, JIS B2311, JISB2312, JISB2313, BS4504, BS4504, BS1560, BS10

Surface treatment: rolling sand, sand blasting, pickling,
Packing: wooden box, according to customer requirements
Minimum order: 1 piece
Delivery time: 1-45 days after receiving the deposit, depending on the quantity required.
Third party inspection: BV, SGS, etc. accepted
Test: direct reading spectrometer, hydraulic tester, X-ray detector, ultrasonic flaw detector, magnetic particle detector, etc.
Certificate: ISO9001. Pressure pipeline certificate, production license, PED, etc.
Productivity: 1800 tons per year
Products are widely used in papermaking, shipbuilding, petroleum, chemical, power, bioengineering, natural gas, sewage, construction, medicine, food (dairy) and other industries.