Flat And Round Drop Cable Pigtail With Hardened SC/APC (OptiTap) Connector

Attenuation vs. Wavelength

Mode Field Diameter (MFD)

Attenuation Discontinuity

Bidirectional Attenuation

Attenuation Nonuniformity

Temperature Cycling

dB/km

≤0.05

High Temperature & High

Humidity

dB/km

≤0.05

Water Immersion

dB/km

≤0.05

High Temperature Aging

dB/km

≤0.05

Min. bending radius mm

100 (Static)

150(Dynamic)

Min. bending radius mm

10D (Static)

20D (Dynamic) (D: Cable diameter)

Type1: 8.1mm×4.5mm Flat Drop Cable

Type2: 10.1mm×4.5mm Flat Drop Cable with conduct

Type3: 5.4mm Round Drop Cable

White scratch ≤1um; No limit ≤2um: 3 pieces;

> 2um not allowed;

Black scratches: Not allowed

Allowed ≤10um:2pcs

Test standard: IEC 61300-2-6

Test wavelength: 1310nm&1550nm

For Connector 1, load: 215N at 5 N/s

Duration: 120s

Load position: 0.2m away from the tail end of the connector

Test standard: IEC61300-2-1

Test wavelength: 1310nm&1550nm

Frequency range: 5Hz to 55 Hz

Frequency variation: 1 oct/min

Vibration direction: 30min in each of X, Y and Z directions

Amplitude: 0.75mm

Meet Table 5 online

Test standard: IEC61300-2-42

Test wavelength: 1310nm&1550nm

For Connector 1, load: 50N

Duration: 1h

Load position: 0.5m away from the tail end of the connector

Meet Table 5 online

Test Standard: IEC61300-2-12 Method B

Test wavelength: 1310nm&1550nm

Drop height: 1m

Number of drops: 10

Front and back meet Table 5

Test standard: IEC61300-2-5

Test wavelength: 1310nm&1550nm

Tensile load: 15N at 1N/s

Tensile load application point: 0.2m from the tail end of the connector

Duration of experiment: 10 cycles, ± 180°

Test standard: IEC61300-2-44

Test wavelength: 1310nm&1550nm

For Connector 1, load: 15N, ± 90°, 50 cycles

Distance from the load point: 0.2 m from the tail end of the connector

Meet Table 5 online

Test standard: IEC61300-2-2

Test wavelength: 1310nm&1550nm

Repeat plugging and unplugging with adapter: 500 times

Cycle rate: The time of each plugging and unplugging is not less than 3s, and the data is recorded once every 25 times of plugging and unplugging

Number of cleanings: no more than 25 times

Front and back meet Table 5

Test standard: IEC61300-2-22

Test wavelength: 1310nm&1550nm

Temperature: -25°C~+65°C

Extreme temperature holding time: 1h

Rate of temperature change: 1°C/min

Number of cycles: 12 cycles

Test standard: IEC61300-2-17

Test wavelength: 1310nm&1550nm

Temperature: -25°C

Duration of exposure: 96h

Sampling rate: record the initial values of insertion loss and return loss after 2 hours of storage at room temperature, record the values of insertion loss and return loss every 1 hour after reaching the stable test temperature as the process value, and record the final values of insertion loss and return loss after the sample returns to room temperature for 2 hours after the low temperature process is over

Test standard: IEC61300-2-18

Test wavelength: 1310nm&1550nm

Temperature: 75°C

Duration of exposure: 96h

Sampling rate: record the initial value of insertion loss and return loss after storing at room temperature for 2h, record the value of insertion loss and return loss every 6h after reaching the stable test temperature, and record the final value of insertion loss and return loss after the sample returns to room temperature for 2h after the high temperature process is over

Test standard: IEC61300-2-19

Test wavelength: 1310nm&1550nm

Temperature: 40°C

Humidity: 93 % ± 5 %

Duration of exposure: 96h

Sampling rate: record the initial values of insertion loss and return loss after 2 hours of storage at room temperature, record the values of insertion loss and return loss every 1 hour after starting the test, and record the final values of insertion loss and return loss after the cycling process

Meet Table 5 online

There is no damage or abnormality such as cracking, discoloration, precipitation, etc

Test standard: IEC60529 IEC 61300-2-23 Method 2

Test 1: Water depth: 5m, Connector 1 immersed in water, duration: stand for 7days; Test requirements: observe that there is no water immersion in the connector;

Test 2: Connect Connector 1 to the box of the adapter, inject 20KPa air pressure into the box, duration: 15min;