2 Core Fiber Distribution Box, PC+ABS, IP65, Splicing/Stripping/Jumper, Indoor/Outdoor

2 Core Fiber Optic Distribution Box

The equipment is widely used as a termination point for the feeder cable to connect with drop cable in FTTH network, telecommunication network, CATV network, data network and local area network etc.. The fiber fixing, stripping, splicing, splitting and jumper can be done in this box, can be used indoor and outdoor.The Fiber Optic Terminal Box is designed to accommodate various fiber optic components, including fiber fixing, stripping, splicing, splitting, and jumper connections, allowing for efficient and reliable fiber optic communication. The box is suitable for both indoor and outdoor use and is made of durable materials such as metal or plastic to protect the delicate fibers from damage and ensure reliable performance.
Features:

• Total enclosed structure, be in nice shape.
• Material is PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65.
• Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
• Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC/LC/PLC adaptor installation, easy maintenance.
• Distribution panel can be flipped up, feeder cable can be placed by express port, easy for maintenance and installation.
• Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.

Specification:

1.Environmental requirement

Working temperature:-40℃～+85℃

Relative humidity:≤85%(+30℃)

Atmospheric pressure:70KPa～106Kpa

2.Main technical datasheet

Insertion loss:≤0.2dB

UPC return loss:≥50dB

APC return loss:≥60dB

Life of insertion and extraction:＞1000 times
3.Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2x10⁴MΩ/500V(DC)；IR≥2x10⁴M Ω/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover；U≥3000V
Configuration table
Table 1 Model and configuration

Product inside structure and cable ways:

Installation:
1．Wall-mounted installation
Drill 3 holes over the wall based on the size in table 1,place the expansion bolt Φ5.5*30,place the box to match up the holes and use bolt to fasten.

Accessories:
1. Users' Manual*1.
2. Key*1.
3. Accessories Bag * 1

Our main products are:
Fiber Optic Cables,
Fiber Optical Splitters,
Fiber Optic Patch Cord,
Pigtails,WDM Modules,
Fiber Distribution Boxes,
Fiber Optic Sockets,
Optical Distribution Cabinets/Hubs,
Outdoor Telecom Cabinets,
Optical Distribution Frames,
Network Rack cabinets, etc.

Dawnergy is an ISO qualified fiber optic solution provider. With solid production capacity, leading R&D strength and strong customization capabilities in the industry, we have supplied fiber optic products to over 65 countries around the world.

Our main products are: Fiber Optic Cables, Fiber Optical Splitters,Fiber Optic Patch Cord, Pigtails,WDM Modules, Fiber Distribution Boxes, Fiber Optic Sockets,Optical Distribution Cabinets/Hubs,Outdoor Telecom Cabinets, Optical Distribution Frames,Network Rack cabinets, etc. Domestically, our shareholders have a large market share in the centralized procurement of China Telecom, China Mobile, China Unicom and China Tower. At the same time, we are also a qualified supplier for major internationally renowned equipment manufacturers and fiber optic cable manufacturers. Our products are also widely used in special networks such as radio broadcast, television, electric power and military.

Specifically in the international market, through direct supply, partnering with local distributors, or cooperating with internationally renowned communication solution providers, our products have been widely used in the FTTH networks of the following operators: TELEFONICA, TIM , STC, BSNL, TOT, CAT, PLDT, TELKOM INDONESIA, TM, NEPAL TELECOM, AIRTEL, etc.